Table of Contents
Advertisement
Quick Links
Mobile DVR Operation manual
DVR instruction
Power connection--------------------------------------------------------------------------------------4
Remote controller instruction----------------------------------------------------------------------6
Login and password---------------------------------------------------------------------------------8
Language set up---------------------------------------------------------------------------------------9
Alarm I/O set up---------------------------------------------------------------------------------------11
Password set up--------------------------------------------------------------------------------------12
Record base set up----------------------------------------------------------------------------------13
Motion detection-------------------------------------------------------------------------------------16
Server---------------------------------------------------------------------------------------------------19
Format---------------------------------------------------------------------------------------------------21
Config----------------------------------------------------------------------------------------------------22
Upgrade-------------------------------------------------------------------------------------------------22
Search recorded video-----------------------------------------------------------------------------23
Playback-------------------------------------------------------------------------------------------------24
Info-----------------------------------------------------------------------------------------------------------25
DVR parameter-------------------------------------------------------------------------------------------26
4CH SD Card
Content
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Parksafe SW004SD
Summary of Contents for Parksafe SW004SD
-
Page 1: Table Of Contents
4CH SD Card Mobile DVR Operation manual Content DVR instruction Power connection--------------------------------------------------------------------------------------4 Remote controller instruction----------------------------------------------------------------------6 DVR operation Login and password---------------------------------------------------------------------------------8 Language set up---------------------------------------------------------------------------------------9 Alarm I/O set up---------------------------------------------------------------------------------------11 Password set up--------------------------------------------------------------------------------------12 Record setting Record base set up----------------------------------------------------------------------------------13 Motion detection-------------------------------------------------------------------------------------16 Network Server---------------------------------------------------------------------------------------------------19 Tools Format---------------------------------------------------------------------------------------------------21 Config----------------------------------------------------------------------------------------------------22... - Page 2 F.A.Q.: 1. Why DVR can not start? A.: when you connect DVR with a stable power source, please connect red and yellow power wire together with +12V, and then connect black wire with GND. And please lock on the DVR front panel.
- Page 3 1. About DVR It is an inexpensive type SD card CAR DVR designed for taxies, buses, mini vans, trucks and ships surveillance. This DVR used high-speed processor, an embedded Linux platform. Video processes such as H.264 Video Compression/Decompression. SD MDVR enables CIF, HD1 and D1 video formats.
- Page 4 1.2 Rear panel Interface Instruction Name Power POWER Power input interface, support DC 8-36V AVOUT Audio and Video out Always connect with monitor or TV A/V input AV1,AV2,AV3,AV4 Connect with Camera 3G/4G antenna Connect with 3G/4G antenna (optional) GPS antenna Connect with GPS antenna (optional) High/low signal input to trigger recording or Alarm input...
-
Page 5: Power Connection
1.3 Power connection Red: POSITIVE Black: NEGATIVE. Yellow: FIREWIRE(ACC). Tips: For testing in with a stable power source, RED+YELLOW connect with positive, and BLACK connect with negative will start DVR. NOTES： 1）Please verify battery voltage before connecting with battery. DVR support 8V-36V power input. DVR will be damaged if power input over 36V. - Page 6 1.4 Packing list Packing list: 4CH MDVR: 1pcs IR remote controller: 1pcs Video input cable: 4pcs (the other side is naked wires only) Video output cable: 1pcs Key: 2pcs 1.5 Video cable: pins instruction Audio Video...
-
Page 7: Remote Controller Instruction
SD memory installation Please use original SD card, Recommend brand Kinstone, class 10, high speed, max. support 128GB 1.7 DVR lock and keys DVR will not working properly if DVR unlock. When you testing or using DVR, please make sure the LOCK is on, otherwise DVR will reboot or power off automatically. -
Page 8: Dvr Operation
2. DVR operation 2.1 Login In preview mode, press “LOGIN” key, type password “111111”, and then, press OK to login. Note: Default password is 111111, please remember if you set up a new password. If you lost it, please contact your supplier for a reset password file. After login, below is main menu... - Page 9 2.2 System set up 2.2.1 Basic set up Instruction： 1. Press direction key to move to the item you want to set up, and type in correct data. 2. Press “cancel” key to delete the wrong data 3. DEV ID is used for 3G/4G function. If you have your own server, you can set up this ID by yourself, otherwise, please contact your supplier for this number.
-
Page 10: Power Setting
2.2.2 Power Setting Instruction： 1. Power Mode: ACC/Timing. Press “Enter” to switch 2. Power off Delay: ACC/close selectable. Press “Enter” to switch. If choose ACC, the user could set the delay time. Press “Cancel” and number keys to input the number. -
Page 11: Alarm I/O Set Up
2.2.3 Alarm I/O set up Instruction: 1. Name: There are 5 different condition, such as turning left, turning right, brake, key alarm. 2. Trigger DVR by High/Low level High level: signal higher than 4V. Low level: signal lower than 4V. 3. -
Page 12: Password Set
2.2.4 Password Setting Instruction： PSW Enable: Press “Enter” to switch on/off. User’s PSW and Admin PSW could only be revised by admin.Press “Cancel” to pop up the number keyboard and revise the new PSW. 3. Record Setting... - Page 13 3.1 Base Setting Instruction： 1．Video mode: Press “Enter “to select PAL/NTSC 2．Record Mode: Press “Enter “to choose select Power/ Alarm/Timed 3．Bitrate: it is a fixed item, you can not set it here. 4．Camera type: DVR support 4 camera input type. A.
-
Page 14: Channel Setting
3.2 Channel Setting Instruction: 1. Set up video and working details for each channel. 2. Function Item Function Enable Set up each channel working or not Resolve Set up video resolution in 720P/D1/CIF Bitrate Higher bitrate makes video better,but it will cost more memory Audio Set up each channel audio recording or not Frame... - Page 15 3.3 Schedule setting Instruction 1. Press direction key to move into the item you want to set. 2. Type in numbers or use “+” and ”-” keys to adjust the time 3. Press Save to save the setting and exit Warning: 1.
- Page 16 3.4 CAM MD Instruction: 1. Set up motion detection for each channel. 2. Function Item Function Enable Set up motion detection for each channel working or not Sensity The higher sensitive will trigger DVR recording easier Area Set up detection area for each channel How to set up motion detection working A.
-
Page 17: Motion Detection
is left upon corner, please press “+” to set this B. Motion detection area decided by 2 points. 1 point (see below picture) C. And then, click the direction key to move the icon... - Page 18 D. Press “-“ key to set up the right down corner. After this, the final detection area had been set. E. Power off DVR, and reboot it.
-
Page 19: Network Server
4.Network 4.1 Server Set up 3G data into DVR MENU. Please contact your local SIM card supplier about these data. 1. The “phone” port, it is “center number”, normally, it is *99# 2. The “access” port, it is “APN”, please ask SIM supplier for that. 3. -
Page 20: Tools
4.3 Other (Unavailable for now) Tools... -
Page 21: Config
5.1 Fromat Sweet tips: when you first time insert SD card into DVR, please wait DVR to format sd card automatically. DVR will detect SD first, and then it will start formatting SD card automatically after 15s. 5.2 Config In order to set up many DVRs in save data, you can use this function. 1. -
Page 22: Upgrade
5.3 Upgrade Upgrade instruction: 1. Copy the update file into SD card 2. Insert SD card into DVR, power on DVR, DVR will find update file automatically, and then you click “Upgrade” key to update dvr automatically. Note: DVR hardware and software version number can be find in this menu. 5.4 Logo customize. -
Page 23: Video
Maintain (Useless in this version) 6. Video 6.1 Search recorded video Instruction: Type the search conditions to find the videos under this condition... -
Page 24: Playback
6.2 Playback recorded video Choose the file and then press “enter” key to playback. 6.3 Playback video on computer by MDVR player. Note: no audio output when you playback on TV/MONITOR... -
Page 25: Info
7. Info Check DVR and memory info... -
Page 26: Dvr Parameter
DVR parameter: Items Parameters Specifications Language Chinese/English/Russian System Operation Menu Graphical User interface（OSD menu） Password Users Password/ Administrator Password Video input 4-CH video input 1.0Vp-p，75Ω Video output 1-CH video COMPOSITE output 1.0Vp-p，75Ω Video Video Display 1 channel or synchronous 4 channels Video Signal PAL/NTSC optional Video Compression... - Page 27 MDVR Electrical parameter Items Parameters Specifications ＋8V--＋36V, When long-term under 8V, or long-term Power input 8—36V over 36V, Auto power off, enter protected mode. Power output 12V(+/-0.2V)，Max:2A. ≤4V Vehicle key ≥5V signal Video input 75Ω 75Ω for each video input impedance impedance Video output Input 2Vp-p CVBS analog signal, reveal device input...
Need help?
Do you have a question about the SW004SD and is the answer not in the manual?
Questions and answers