Restore Device To Factory Settings - Soberlink SL2 Training Manual

Restoring SL2 to Factory Settings
1. Collect Device & Archive Client
Log in to the Monitoring Web Portal and click Edit under the
Client who will no longer use Soberlink.
Click the Stop Monitoring button.
The Client, along with all of their testing history, will be moved
to the Archive section of the Monitoring Web Portal.
This will "release" the Device to be activated for a new Client.
2. Reset the Soberlink Device
Power on the Device and click both display buttons (without holding them down).
This will take you to the Menu Options screen.
On the Menu Options screen, use the right display button and scroll down to Reset Device.
Highlight and select Reset Device. Then enter the button sequence: Power, Left, Right, Power.
Once successfully reset, the Device will display the "Activation Required" screen. The Soberlink Device is
ready to go back into inventory or be assigned to a new Client.
3. Reassign the Soberlink Device
To assign the Device to a new Client:
Follow the SL2 Activation Process shown on pages 7-9.
Cellular Device Training Manual
15