Radio Interfaces - Go Net Systems GoBeam8000 Quick Configuration Manual

NOTE: For more information on the different type of radio interfaces your device contains
and the interface numbers for the backhaul radio interfaces see the Radio Interfaces
table.
Example:
/configure sitesurvey start spectrum 2.4G auto-channel-selection disable
show sitesurvey
/configure interface Dot11Radio 0 channel 8
copy running-config startup-config

Radio Interfaces

Each GoBeam device uses multiple radio interfaces to communicate with other GoBeam
devices and customer stations. The actual type of radio interfaces available is dependent on
the model of the GoBeam device, as shown in the following table.
Product Model
GoBeam 8000
Only 5.4 GHz and 5.8 GHz interfaces are defined as 802.11a backhaul radio interfaces by default.
All 2.4 GHz and 4.9 GHz interfaces are defined as access radio interfaces only by default
All contents are Copyright © 2013 Go Net Systems Ltd. All rights reserved.
GoBeam8000 Quick Configuration Guide
Document#
Page 5
Product P/N Interface 0
800001 xRF 2.4 Ghz
Interface 1
xRF 5.X Ghz
UM000004 Rev. 1.0