Elk -1RT Instructions

Speaker & Stainless Steel Enclosure
ELK-1RT
The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker
mounted in a tamper resistant, "No Rust"
enclosure. It features two sealed reed tamper
switches, one on the Back plate and one on the
Front Cover. The stainless steel naturally reflects
the mounting surface and blends easily with any
residential or commercial building. Also available
is the ELK-150RT with Built-in Siren or the
ELK-SL1 Strobe Light that can be added to the
enclosure.
Features
• Installer Friendly - Easy to Mount.
• Exterior / Interior use.
• Sealed Reed Tamper Switches at single bolt
closure and at rear of cabinet.
• No Rust - No Mess.
• Compact - Less Noticeable.
• Loud - Rivals Sound of Larger Speakers.
• Heavy Duty 1.8 lb Magnet.
• High Fidelity Voice Coil.
• Stainless Steel Mounting Hardware Included.
• Lifetime Limited Warranty.
Specifications
• Rating: 30 Watts Nominal / 50 Watts Peak.
• Impedance: 8 Ohms.
• Frequency Response: 500 to 7000 Hz.
• Enclosure: #304 Stainless Steel.
• Size: 5"H x 5"W x 4"D.
• Tamper: Sealed Reed Switches.
Features and Specifications subject to change without notice.
PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax 828-397-4415 • www.elkproducts.com • info@elkproducts.com
05/02
Tamper-Proof Cover 30 Watt Speaker
Back Plate w/
Hardware Pak
(2) Tamper
Switches
ELK
ELK-1RT
with optional
ELK-SL1C
Clear Strobe
Cut-away
view
Components of
ELK-1 RT
PRODUCTS, INC.