Advertisement
Quick Links
ASSEMBLY & USE INSTRUCTIONS
IMPORTANT SAFETY WARNINGS
1.Read these instructions before using this product.
2.Save these instructions for future reference.
3.For indoor use only. To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture. The product shall not be exposed to rain, dripping or splashing and that objects filled with liquids,
such as vases, shall not be placed on product.
4.DO NOT block any ventilation opening. Install in accordance with the manufacturer's instructions.
5.DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
6.THIS PRODUCT IS NOT A TOY; PLEASE KEEP AWAY FROM THE REACH OF CHILDREN.
7.DO NOT use this product other than its intended use.
8.This seasonal use product is not intended for permanent use or installation.
9.UNPLUG this apparatus when leaving the house, retiring for the night, or if left unattended.
10.DO NOT secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
11.DO NOT hang ornaments or other objects from cord, wire, or light string.
12.DO NOT close doors or windows on the product or extension cords as this may damage the wire insulation
13.DO NOT cover the product with cloth, paper or any material not provided with the product when in use.
14.DO NOT let lamps rest on the supply cord or on any wire.
15.DO NOT use the adaptor supplied with any other products.
16.Only power this product with the adaptor supplied.
17.Always connect the adaptor to an indoor socket.
18.Protect the power cord from being walked on pinched particularly at plugs. Convenience receptacles and
the point where they exit from the apparatus.
19.Only use attachments/accessories specified by the manufacturer.
20.Refer all servicing to qualified service personnel. Service is required when the apparatus has been dama
-ged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
21.Always position your tree and cable and any extension leads so that they will not be a hazard to the elde
-rly,pets and children.
Caution-
22.
Atificial trees have small parts which may cause a choking hazard if detached from the branches.
23.Electronic component must be handled with care.
24.Do not adjust the tree height once it is decorated.
SPECIAL CAUTIONS
To reduce the risk of fire and electric shock:
DO NOT install on trees having needles, leaves or branch coverings or metal or material that look like metal.
DO NOT mount or support strings in a manner that can cut or damage wire insulation.
DO NOT connect the chain to the supply while it is in the packing,
The bulbs are replaceable.
The external flexible cable or cord of this lighting chain cannot be replaced' if the cord is damaged, the
luminaries shall be destroyed.
Use only the lighting chain provided.
1001777085
SKU#
7FT to 10FT LED Pre-Lit
Rising Artificial Spruce Tree
Advertisement
Summary of Contents for Packo Gift 1001777085
- Page 1 1001777085 SKU# ASSEMBLY & USE INSTRUCTIONS 7FT to 10FT LED Pre-Lit Rising Artificial Spruce Tree IMPORTANT SAFETY WARNINGS 1.Read these instructions before using this product. 2.Save these instructions for future reference. 3.For indoor use only. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
-
Page 2: Battery Safety Warnings
ALWAYS UNPLUG FROM THE MAINS SUPPLY BEFORE CHANGING A BLUG. DO not remove or insert lamps while the chains are connected supply. Replacement lamps must be of the same type, rated voltage and wattage as those delivered originally or of a type specified by the manufacturer. -
Page 3: Before Your Start
BEFORE YOUR START Decide on appropriate lacation which at lease have 10FT hight spacing for your prodcut. Remove all plastic bags and dispose of safety out of the reach of children & animals. Tree is heavy. Recommend at least two people set up. HOW TO ASSEMBLE THE TREE Each carton contains two tree sections , one adapter , two piece 23A batteries and twenty four replace bulb. - Page 4 OPERATION GUIDE 1.1 OPERATING WITH THE KEY CONTROLS ON RECEIVER. Noted: Do not adjust the tree hight once it is decorated. The tree will The tree will keep going down to keep rising to By pressing button STOP , 7FT until you press 10FT until you press the tree will stop rising at stop button .
- Page 5 1.2 OPERATING WITH THE REMOTE CONTROL . Noted: Do not adjust the tree hight once it is decorated. There are two clolors There 8 light functions as below lights ( Warm white * Stead On & Multi ). * Slow Sparkling Press once to turn light ON.
-
Page 6: Troubleshooting
TROUBLE SHOOTING Problem Possible Cause Solution 1. No power. 1. Check the adapter is plugged to mains. 2. Light ON button is not pressed. 2. Press light ON button once. 3. Light bulb is missing or burn-out in 3. Check not missing or burn-out of light No Light the chain. - Page 7 SHAPING INSTRUCTIONS Shaping the tree branches is the last step of assembly. The care and attention given to this final process will result in a genuinely beautiful and appealing holiday centerpiece. 1.Every tree style is shipped from the factory with the tips of each branch compressed to the center ( Fig5 ).
- Page 8 This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.