Revision History - Dell EMC VxBlock Systems 350 Administration Manual

Revision history

Date
October 2017
October 2017
September 2017
September 2017
August 2017
June 2017
February 2017
December 2016
October 2016
Document revision
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
Description of changes
Added a section for configuring VMware
Enhanced Linked Mode (vSphere 6.5U1).
ELM dependencies and limitations - updated
statement regarding Vision software.
Added and updated topics for VMware vSphere
6.5.
Updated the following topics:
•
Starting Cisco UCS Manager - added UCS
Manager 3.x changes.
•
Upgrading the Cisco UCS C2x0 Server -
split into two topics CIMC 2.x firmware and
CIMC 3.x.
Deleted the topic Backing up network devices
running Cisco IOS software - Nexus switches
do not run IOS so this topic was not required.
Refer to the topic Backing up network devices
running Cisco NX-OS software.
Adding a VLAN to a service profile template -
removed step 4.
Added a section containing guidance for
configuring VMware Enhanced Linked Mode.
Updated to support Dell EMC Unity All-Flash
350F, 450F, 550F, and 650F storage arrays for
VxBlock System 350.
Made updates related to IPv6.
Added the following section to the document:
Managing VMware NSX with VPLEX on
VxBlock Systems
Added a note about how to determine whether
an NX-OS upgrade might need to be done in
two stages rather than the usual one.
Changes for Cisco Falcon software
Added support for IPv6.
Removed VLAN 118 from topics.
Initial version
Revision history | 2