POWER AND CHARGING INTENSITY WIRED AUDIO SOURCE HEADPHONES BLUETOOTH AUDIO SOURCE CONTROL BOX LED INDICATORS AND STATES CONTROL BOX PLACEMENT HEADPHONE CABLE ROUTING TIPS FOR OPTIMAL USE added the X USING YOUR SUBPAC® M2X IN THE STUDIO SUBPAC® MANUFACTURER’S 1 YEAR WARRANTY...
DO NOT reach for a device that has fallen into water. Unplug it from the wall immediately. TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS: Your SUBPAC® device should never be left unattended when plugged in. Unplug it from the power outlet when not being used and before putting it on.
IMPORTANT SAFEGUARDS AND CAUTION NEVER operate this device if it has a damaged cord or plug, is not working properly, has been dropped or damaged, or submerged in water. Please return it to the SUBPAC® service center for examination and repair.
A dj u s t ab l e S h ou l de r St r a p H ea d ph o ne O u t Po r t Using a screwdriver, the clip can be flipped to use on the opposite side of your SUBPAC® M2X...
FIT AND ADJUSTABILITY The SUBPAC® M2X is designed to fit tightly on your body. The more physical contact the unit has with your back, the better the experience will be. The SUBPAC® M2X has been ergonomically designed to fit the contours of your back naturally.
POWER AND CHARGING SUBPAC® M2X is powered by an internal battery pack. Use the provided power supply with your region specific power cord to plug into a power outlet for a full charge. A full charge should take up to 4 hours.
For Bluetooth pairing, power o the device, unplug the audio cable, and then hold down the power button for 4 seconds to make your SUBPAC® M2X visible to devices. The Bluetooth LED will turn solid blue. add OTHER before “devices” ?? replace “blue LED”...
(clipping) in Bluetooth Indicator the SUBPAC® M2X. To reduce the possibility of tactile distortion and possible damage to your SUBPAC® M2X, simply reduce the input level (volume of your playback device) to the point where the red LED is no longer flashing.
CONTROL BOX PLACEMENT WING STRAP SUBPAC® M2X You can clip the control box on the lower wing strap located near the exit cable on the right or left side of the unit. added “of the unit” WAIST STRAP You also have the option of clipping the control box on the provided waist strap if you choose to use it.
TIPS FOR OPTIMAL USE As tempting as it may be, we do not recommend cranking the intensity knob – the SUBPAC® M2X is designed to be used at moderate levels for bass heavy music, and at higher levels for acoustic-based music (funk, soul, jazz, classical, etc.). Be mindful of the clipping LED when turning up the volume on your device connected to the M2X line input.
SUBPAC®’s physical sound products are warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, SUBPAC® will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost.
Page 14
SUBPAC.com) are not eligible for warranty coverage. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. SUBPAC® will not replace missing components from any package purchased through an online auction.
Need help?
Do you have a question about the M2X and is the answer not in the manual?
Questions and answers