Safeplace Magna 800C Technical Manual & Handheld Unit Manual page 19

Trouble-Shooting 2
Display Problem Description
Er30 Unit disabled
Er31 Master disabled
Er32 Wrong master
Er35 Wrong master
Er36 Master disabled
Er37 Memory problem
Er38 Master defin. Err.
Er39 Memory problem
Operational Problems in Dual Safes
Er40 Wrong key
Er41 Button disabled
Er42 No Code Entered
Er43 Wrong key
Er44 Wrong key
Er45 Illegal Operat.
Er46 Illegal Card
Er47 Illegal Button
Er48 Keypad disabled
Er50 Keypad disabled
Er64 No master defined
Er66 Master defin. Err.
Er67 Master defin. Err.
Er68 Master defin. Err.
Er70 Software error.
Er71 Illegal Time
Er73 Card Unauthorized
Er74 Can't Add Card
Er75 Can't Add Card
Er76 Can't Delete Card
Er77 Factory Error
Er78 Can't Add Card
Er79 Add/Del Time Ended
Er80 Bad Card
Er81 Factory Error
Er82 Factory Error
Er83 Can't Close with This Card
Er84 Memory problem
Er85 Memory problem
Override Problems
Use different type of override
Use override unit or code
Use iButton or code
Use card or code
Use different type of override
Replace main PCB
Factory Error
Try process again.
Open with code or card
Use code or card
Enter code and lock
Open with code or iButton
Open with card or iButton
Use code or iButton
Use different card
Use different iButton
Use card or iButton
Use card or iButton
Manufacturer Problems
Factory Error
Factory Error
Factory Error
Factory Error
Check designated operation time
Try to close with a different card
Card already registered
Illegal user card
Not a registered card user
Factory Error
Memory full
Start process again
Can't register this card
Factory Error
Factory Error
Illegal user card
Replace main PCB
Replace main PCB
Operation Instructions
19