Setting The Auto Rotate Function - Canon powershot SD870IS digital elph User Manual

EC231CUG-E.book Page 125 Thursday, June 7, 2007 10:22 AM

Setting the Auto Rotate Function

See Functions Available in Each Shooting Mode (p. 238).
Your camera is equipped with an Intelligent Orientation sensor that
detects the orientation of an image shot with the camera held vertically
and automatically rotates it to the correct orientation when viewing it in
the LCD monitor.
1
Select [Auto Rotate].
1. Press the button.
2. Use the or button to select the
[ ] menu.
3. Use the or button to select
[Auto Rotate].
2
Accept the setting.
1. Use the or button to select
[On] or [Off].
2. Press the button.
• When the Auto Rotate function is set
to [On] and the LCD monitor is set to
the detailed display mode during
shooting, (normal),
down) will appear in the display.
This function may not operate correctly when the camera is
pointed straight up or down. Check that the arrow
pointing in the right direction and if it is not, then set the Auto
Rotate function to [Off].
Even if the Auto Rotate function is set to [On], the orientation
of images downloaded to a computer will depend upon the
software used to download the images.
Various Shooting Methods
(right end is down) or (left end is
125
is