Canon powershot SD870IS digital elph User Manual page 121

EC231CUG-E.book Page 119 Thursday, June 7, 2007 10:22 AM
2
Press the button.
• The camera will switch to color input
mode and the display will alternate
between the original image and the
color swap image (using the
previously set color).
3
Aim the camera so that the original color
appears at the center of the LCD monitor and
press the button.
• Only one color can be specified.
• You can use the
that are swapped.
-5: Only takes the color that you want to swap
+5: Also takes colors close to the one that you want to swap
4
Aim the camera so that the desired color
appears at the center of the LCD monitor and
press the button.
• Only one color can be specified.
5
Press to complete the setting, then shoot.
The default setting for color swap mode changes green into white.
You may not obtain the expected results if you use the flash.
The colors specified in the color swap mode and the color
range are retained even if the camera's power is turned off.
The ISO speed may increase, or the noise in the image may
increase depending on the shooting conditions.
Various Shooting Methods
or button to specify the range of colors
119