1. Manuals
  2. Brands
  3. AMTC Manuals
  4. Wireless Router
  5. WR7502
  6. User manual

AMTC WR7502 User Manual

750m wireless router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WR7502
750M Wireless Router

User Guide

Copyright statement
Is the registered trademark of Shenzhen MTC Co., LTD. All the products and
product names mentioned herein are the trademarks or registered trademarks of their
respective holders. Copyright of the whole product as integration, including its accessories
and software, belongs to Shenzhen MTC Co., LTD. No part of this publication can be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means without the prior written permission of Shenzhen
MTC Co., LTD. If you would like to know more about our product information, please visit
our website at
http://www.SZMTC.com.cn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WR7502 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AMTC WR7502

Summary of Contents for AMTC WR7502

  • Page 1: User Guide

    WR7502 750M Wireless Router User Guide Copyright statement Is the registered trademark of Shenzhen MTC Co., LTD. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen MTC Co., LTD.

  • Page 2: Fcc Statement

    Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, MTC reserves the right to make changes to the products described in this document without obligation to notify any person or organization of such revisions or changes. MTC does not assume any liability that may occur due to the use or application of the product or circuit layout(s) described herein.

  • Page 3: Important Safety Instructions

    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. FCC RF Radiation Exposure Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1）this device may not cause harmful interference...

  • Page 4: Preface

    13. Unplug this product from the wall socket before cleaning. Use a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners. 14. The specification of the fuse is for WR7502 to avoid damage, please do not change the fuse.
  • Page 5 This user guide uses the following formats to highlight special messages: ICON Description This format is used to highlight information of importance or special interest. Ignoring this type of Note note may result in ineffective configurations, loss of data or damage to device. This format is used to highlight a procedure that will save time or resources.

  • Page 6: Table Of Contents

    Contents Important Safety Instructions ......................... 3 Preface ..............................4 Chapter1 Product Overview .................. 错误！未定义书签。 1.1 Introduction ....................错误！未定义书签。 1.2 LED Indicator .................... 错误！未定义书签。 1.3 Physical Interfaces ................... 错误！未定义书签。 Chapter 2 Connecting Mechanism ..............错误！未定义书签。 2.1 Preparation ....................错误！未定义书签。 2.2 Hardware Connection ................错误！未定义书签。 2.3 Configure PC TCP/IP Settings ...............
  • Page 7 4.3.4 Access Control ........................35 4.3.6 Connection Status ........................ 36 4.4.1 Device Sharing ..................错误！未定义书签。 4.4.2 Media Server ..................错误！未定义书签。 4.4.4 User Accounts ..................错误！未定义书签。 4.6 DHCP Server ..........................37 4.6.1 DHCP Server .......................... 37 4.6.2 DHCP List & Binding ......................38 4.7 Virtual Server ..........................
  • Page 8 1 Configure PC TCP/IP Settings ................错误！未定义书签。 Windows XP ....................错误！未定义书签。 2 FAQs ......................错误！未定义书签。 3 Factory Default Settings ................. 错误！未定义书签。...

  • Page 9: Chapter1 Product Overview

    Chapter1 Product Overview 1.1 Introduction WR7502 is simultaneous Dual Band, with maximum speed up to 300Mbps 2.4G and 433Mbps 5G Hz.The router can bandwidth control and parental control, and has 3 external antennas.  Complies with IEEE 802.11a/b/g/n/ac and IEE802.3/3u.

  • Page 10: Led Indicator

    1.2 LED Indicator The LED indicator displays information about the device’s status. Meaning Status Description Blinking The router has booted. System Solid The router is booting or upgrading. Power is off or the router is not booted. Orange The router is booting or can’t connect to Internet normally. Ethernet Green There is device connected to the WAN port.

  • Page 11: Chapter 2 Connecting Mechanism

    Chapter 2 Connecting Mechanism 2.1 Preparation Before you start the installation process, you need to prepare the following: Item Description Router Find it in your package. Power Find it in your package. adapter Should have a installed IE8 or higher browser. DHCP, PPPOE or Static IP Internet Connection Type: 1.

  • Page 12: Hardware Connection

    2.2 Hardware Connection Note ------------------------------------------------------------------------------------------------------------------- Before connecting, please make sure that you can surf the internet in your computer to use the reticle provided by ISP. ---------------------------------------------------------------------------------------------------------------------- ----------- ① Please connect reticle which from ISP to your router's WAN port. ②...
  • Page 13 ② Click Network and Internet. ③ Click Network and Sharing Center.
  • Page 14 ④ Click Change adapter settings. ⑤ Click Local Area Connection and select Properties.
  • Page 15 ⑥ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. ⑦ Select Obtain an IP address automatically and click OK ⑧ Click OK on the Local Area Connection Properties window to save your settings...

  • Page 17: Chapter 3 Log In To The Router

    Chapter 3 Login the Router 3.1 Login To access the Router’s Web-based Utility, launch a web browser such as Internet Explorer or Firefox and enter http://192.168.1.1 in your browser's address bar. Press “Enter”. The system will automatically display the login page, please enter the correct the password (default password is admin).

  • Page 18: Chapter 4 Features & Configurations

    Chapter 4 Features & Configurations 4.1Quick Setup The “Quick Setup” function can help you use the router quickly. The Router has two function “Router” “WISP”. Parameters Specification:  Router: Retical connect WAN port and ISP(Internet Sever Provider),LAN port connect PC(personal computer),and you can use Wifi. ...
  • Page 19 “Static “Dynamic IP” “PPPOE” ② Select your connection type,including IP” “PPTP” “L2TP”,we use “Static “Dynamic IP” “PPPOE” as usually, IP” “PPTP” “L2TP” usually use by company.Using Static IP as example. ③ Set your 2.4G wifi and 5G wifi. Click “Save” and you have setted the ④...
  • Page 20 4.1.2 Set The WISP Mode ① Set operation mode of WISP ② Click “Open Scan” to scan wifi,then choosing an usable wifi,enter it’s password. ③ Set your 2.4G wifi and 5G wifi. Click “Save” and you have setted the WISP mode. ④...

  • Page 21: System Status

    4.2 System Status 4.2.1 System Status This page displays Connected Clients, System Version, Running Time, System Time. Parameters Specification:  Connection Clients: displays the number of DHCP clients.  System Version: Firmware Version.  Running Time: Displays the time duration indicating how long the router has been up since startup.
  • Page 22 Parameters Specification:  Connection Type: It displays the current access mode of WAN port.  Connection Status: The network connection status.  WAN MAC Address: MAC address of your ISP's router to see.  WAN IP: IP address obtained from ISP. ...

  • Page 23: Lan Status

    4.2.3 LAN Status Parameters Specification:  Domain Name:Enter domain name into URL bar,you can also go into router’s web page.  IP Address: The Router’s LAN IP Address (not your PC’s IP address).  Subnet Mask: The Router’s LAN subnet mask. ...
  • Page 24 Parameters Specification:  SSID Name：The name of Wireless.  BSSID: The MAC Address of Wireless.  Channel：The Channel of Wireless.  Security Mode: Encryption schemes. Tips  The default SSID of 2.4G is MTC_2.4G_XXXXXX, and SSID of 5G is MTC_5G_XXXXXX, where XXXXXX is the last six characters in the device's MAC address.

  • Page 25: Network Settings

    Network Settings Click “Network Settings” enter the Network setup web page，in this page you can set “LAN Settings”, “WAN Settings”, “MAC Address Clone”. 4.3.1 LAN Setting This page is to configure the basic parameters for LAN ports. This IP address is to be used to access the device’s settings through a web browser.

  • Page 26: Wan Setting

    3. The router's LAN IP address and WAN IP address cannot be on the same IP segment. If not, the router will not be able to access Internet. 4.3.2 WAN Setting Plug Internet cable to WR7502 WAN port. Set Steps： ①...
  • Page 27 Instruction WAN Connection Type If your ISP provides you with an Ethernet cable from the incoming Internet side IP information (IP address, subnet Static IP mode mask, gateway IP address, DNS server address), your ISP uses a static IP connection. If your ISP provides you with an Ethernet cable from the Dynamic IP incoming Internet side but no ISP login account or IP...
  • Page 28  Address/Subnet Mask/WAN subnet mask/Gateway/Primary Server/Secondary DNS Server: Enter the ISP information you gathered in Preparation.  Click Save to save your settings. Tips  MTU better to choose the default values. 1.2>Dynamic IP mode. Set Steps： ① Click “Network Settings”. ②...
  • Page 29 ③ Select Connection Type “PPPOE”. ④ Enter the ISP login User Name，the ISP login Password. ⑤ Click “Save” to confirm. ⑥ Click “System Status”--->“WAN Status” to confirm Knowledge Expansion  MTU: Maximum Transmission Unit. It is the size of the largest data packet that can be sent over the network.

  • Page 30: Mac Address Clone

    software cannot open or be enabled, you can try to change the MTU value to 1500 or 1400. 4.3.3 MAC Address Clone Some ISPs (Internet Service Providers) require enter user's MAC address to access their network. This feature copies your current PC's MAC address to the router. Set Steps：...

  • Page 31: Wlan Settings

    Parameters Specification:  MAC Address: The computer or broadband modem authorized by your ISP. Knowledge Expansion 1. Restore to Factory Default MAC: Reset the router’s WAN MAC to factory default. 2. Clone MAC: Clicking this button copies the MAC address of the computer that you are now using to the router.
  • Page 32 ① Click “WLAN Settings”. ② Select “Basic Settings”. ③ Wireless Enable. ④ Select Network Mode ⑤ Enter SSID name (Default name is MTC_2.4G_XXXXXX). ⑥ Select “Channel”. ⑦ Select “Channel Bandwidth”. Parameters Specification:  Wireless: wireless “Enable” or “Disable”.  SSID: It is the unique name of the wireless network and can be modified. ...

  • Page 33: Security Settings

     The SSID must be entered. Knowledge Expansion Network Mode (802.11 Mode): Select a correct mode according to your wireless clients.  11b: This network mode delivers wireless speed up to 11Mbps and is only compatible with 11b wireless clients. ...
  • Page 34 Parameters Specification:  Security mode: WPA – Personal、WPA2 – Personal、Mixed WPA/WPA2 – Personal. Security mode Instruction Disable Not open this function WPA – Personal Support AES and TKIP cipher types WPA2 – Personal Support AES, TKIP and TKIP+AES cipher types Both WPA-Personal and WPA2-Personal secured Mixed WPA/WPA2 –...

  • Page 35: Access Control

    4.4.3 WPS Settings WPS function usually apply to your telephone.Go into your telephone’s Wlan setting,there is a WPS Push Button. After click the button,click “PBC” as soon,then your telephone will connect to the wifi automatically.And the Wifi password will compose by 64 randomly generated characters.So the function can guarantee the security of Wifi meanwhile.

  • Page 36: Connection Status

    Tips  Up to 10 wireless MAC addresses can be configured  You can get the application’s mac address those connected to your wifi in the page “Connect Status”,and determine which application you “Allow”,”Block”.Default status of the function is “off”. 4.4.5 Connection Status This page shows the current wireless access list Click “Refresh”...

  • Page 37: Dhcp Server

    Tips  The bandwidth here refers to the channel bandwidth instead of wireless connection rate.  You can know whether there are unauthorized accesses to your wireless network by viewing the wireless client list. 4.5 DHCP Server Click “DHCP Server” enter the DHCP Server configure page ,here you can set “DHCP Server”, “DHCP List &...

  • Page 38: Dhcp List & Binding

    address of the IP address pool here. These address should be part of the same IP address subnet as the router’s LAN IP address.  Enter the Lease Time Knowledge Expansion  DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the LAN/private network.

  • Page 39: Virtual Server

    Parameters Specification:  Enter the IP Address and MAC Address  Click “Add” add to the DHCP list  Click “Refresh” to update the related DHCP client information. Tips  you can specify a reserved IP address for a PC in the LAN. That PC will always receive the same IP address each time when it accesses the DHCP server.

  • Page 40: Port Range

    The protocol and port are the ones used by the service and "xxx.xxx.xxx.xxx" is the WAN IP address of your router. For example, a FTP server uses the ftp protocol and 21 (standard port number). Topology Chat: WAN IP:192.168.1.3 WR7502 Other Router Your PC Reticle Other’s...
  • Page 41 Turn on your “FTP service” by setting up a User and choosing files you want to ② share.(You can download a software “Xlight FTP” for establish FTP service)
  • Page 42 If WR7502’s WAN IP is 192.168.1.3,Others’ PCs which connect to the “other ③ router” LAN port enter ftp:\\192.168.1.3:21 in the URL bar,and then enter your userName and password, others will share your files. In fact, there are many port you can use.You can use those ports by surfing the...

  • Page 43: Dmz Settings

    Internet.And method is same as the example. 4.7.2 DMZ Settings Set Steps： ① Click “Virtual Server”. ② Select “DMZ Settings”. ③ Select “Enable” ④ Add DMZ Host IP which is the LAN IP ⑤ Click “Save” to confirm. Tips  The DMZ Settings screen allows one local computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing.

  • Page 44: Upnp Settings

    2. Hackers may use the DMZ host computer to attack other computers on your network 4.6.3 UPnP Settings The Universal Plug and Play (UPnP) feature allows network devices on connect to router can see it’s signal in the “Internet”.Click the signal you can straight in the webpage of the router as below.

  • Page 45: Url Filter

    4.7.1 URL Filter This section is to set URL filtering access. If you want to enable this function, please activate the checkbox. Select one policy from the drop-down menu and enter a policy name in the field. Of course, you can set the access restriction in details (e.g. the fixed IP range, URL, times and days).

  • Page 46: Client Filter

    ⑤ Click “Save” to save your settings. Tips 1. Different URL strings must be separated with a comma. To match all websites, use * (asterisk) 2.Up to 10 filter rules can be configured. 3. If you have not set up the system time for this device, click System Tools -> Time Settings to set up correct time and date for the rules to be effective 4.7.2 Client Filter This section allows you to set the times specific clients can or cannot access the...

  • Page 47: Mac Filter

    4.7.3 MAC Filter “MAC Filter” is differ from “Access Control” in “WLAN Settings”,the MAC Filter can block every applications those connect to the router.And “Access Control” can only block applications which connect to the router’s Wifi. You can get the applications’s MAC address which connect to the router by clicking “Search Mac Address”.

  • Page 48: Remote Web

    4.7.4 Remote WEB This section is to allow the network administrator to manage the router remotely. If you want to access the router remotely, please select “Enable”. Set Steps： ① Click“Security Settings”. ② Select “Remote WEB”. ③ Enter the Port ④...

  • Page 49: Wan Ping

    Knowledge Expansion Port: This is the management port to be open to outside access. The default setting is 8080. This can be changed 0.0.0.0: This means all IP address will be ok. 4.7.5 WAN Ping The ping test is to check the status of your internet connection. When disabling the test, the system would prevent the ping test from WAN.This function will protect you from WAN attacking.

  • Page 50: Routing Settings

    Set Steps: ① Select the “Expert Setting” ② Select the “WAN Ping” ③ Select the “Enable” Before you enable the “WAN Ping” go into CMD.Enter ping 10.10.10.2,you can get answer.After enable the “WAN Ping”, Enter ping 10.10.10.2,you cannot get any answer.

  • Page 51: Triffic Control

    network segment.  Subnet Mask: The subnet mask for the specified destination.  Gateway: This is the next router on the same LAN segment as the router to reach.  Interface: The interface between your router and the final destination. 4.9 Triffic Control Traffic control is used to limit communication speed in the LAN.Up to 20 entries can be supported with the capability for at most 254 PCs' speed control,including for IP...
  • Page 52 he can get. For example, you can split the 4M into two, so your neighbor can only use up to 2M Internet traffic and you can enjoy 2M. Set Steps： ① EnableTraffic Control: Check the Enable box to enable the Traffic Control feature. ②...
  • Page 53 Click “Scan” button , wait a minute , you could see the USB drive connected to the Router. 4.10.2 USB Server You can configure USB server on this page. You could enable these servers to share the information in USB driver. And other user in this local area network could see these information(including music, video，photo).
  • Page 54 You could add user in your USB Server. And other user could use this user name and password to login in the USB Server Input User names and Passwords you want into the blanks，then kick “ADD”to add them. 4.10.4 How to use them—For Samba ①...
  • Page 55 4.10.5 How to use them—For FTP ① Open “My computer” ② Input your IP in blank bar，then press“Enter” ③ Input your user name and password in session Windows After Pressing “Enter” ，it can be show the information in USB device ！...
  • Page 56 4.10.6 How use them—For DLNA ① You can configure DLNA server on this page，select DLAN and press “Save” ② Open “ Windows Media Player” ，select “mtc_DLNA”on the left of the list.

  • Page 57: System Tools

    4.11 System Tools Click “System Tools” enter the configure page ,here you can set “Time Settings”, “DDNS”, “Backup/Restore”, “Factory Default”, “Reboot”, “Firmware Upgrade”, “Change Password”, “System Log”. 4.11.1 Time Settings Click System Tools -> Time Settings to enter the time page. Tips Configured time and date info will be lost if the device gets disconnected from power supply.

  • Page 58: Ddns

    ⑥ Click Save to save you settings.  Synchronize with your PC:Specify a time interval for periodic update of time and date information from your host. 4.11.2 DDNS 4.11.3 Backup & Recover Set Steps： ① Click “System Tools”. ② Select “Backup/Restore”. Parameters Specification: ...
  • Page 59 configuration will be ineffective. 4.11.4 Firmware Update The router provides the firmware upgrade by clicking the “Upgrade”after browsing for the firmware upgrade packet. After the upgrade is completed, the router will reboot automatically. Set Steps： ① Click “System Tools” ② Select “Firmware Upgrade”...
  • Page 60 Click “System Tools”. ① Select “Restore to Factory”. ② Parameters Specification:  This “Reset” button is to reset all configurations to the default values. It means the Range Extender will lose all the settings you have set. So please note down the related settings if necessary.
  • Page 61  Rebooting the Wifi Router is to make the settings configured go into effect or to set the Range Extender again if setting failure happens. 4.11.7 Change Password You can change the password by this function Set Steps： ① Click “System Tools” ②...
  • Page 62 4.11.8 System Logs The section is to view the system log. Click the “Refresh” to update the log. Click the “Clear” to clear the screen. Set Steps： ① Click “System Tools” ② Select “System Log” ③ Click “Refresh” can update the information ④...
  • Page 63 Appendix 1 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. 1. 1 Q: I cannot access the device's management interface. What should I do? ...

  • Page 64: Factory Default Settings

    1.2 Q: I changed the login password and unfortunately forget it. What should I do? Press the RST button for over 10 seconds to restore your device to factory default settings. 1.3 Q: My computer shows an IP address conflict error after having connected to the device.
  • Page 65 WAN Speed Auto Disable IP Address 192.168.1.1 Subnet Mask 255.255.255.0 LAN Settings DHCP Server Enabled （LAN） IP Pool 192.168.1.100~192.168.1.200 (GMT+08:00)Beijing,Chongqing, Hong Time Zone Kong, Urumqi Wireless Enabled MTC_XXXXXX (where XXXXXX is SSID the last six characters in the device's MAC address) Wireless Mode 11b/g/n mixed Mode 2.4G Wireless...
  • Page 66 APSD Capable Disabled Wireless Security Disabled Wireless Access Control Disabled Remote Web Management Disabled Bandwidth Control Disabled Others DMZ Host Disabled UPnP Disabled Internet Access Management Disabled...

Table of Contents