Systems Requirements; Hardware Installation; Connecting The Pci Card - Surecom EP-9321-g1 User Manual

EP-9321-g/g1
802.11g 54M Wireless LAN PCI Adapter

1.4 Systems Requirements

1. A Desktop computer with an available 32bit PCI slot.
2. Operating System: Windows 98SE/2000/ME/XP
3. 2M bytes free disk space for utility and driver installation.
Note: If you insert the WLAN PCI Adapter before installing the driver and utility, the operating system will
detect a new device and start to configure the new device. Click Cancel to finish the wizard. Follow the
instruction step by step to install the WLAN PCI Adapter.

2. Hardware Installation

2.1 Connecting the PCI Card

Insert the PCI Card into the PCI slot on your desktop, and push it until it is firmly seated.
Antenna Reverse SMA connector
LED: Act – Blinking when transmitting/
Receiving data
5