1. Manuals
  2. Brands
  3. Hearth Products Manuals
  4. Indoor Fireplace
  5. F-031XX1 series
  6. User instructions

Hearth Products F-031XX1 series User Instructions

Cavello gas fire; cavello xe gas fire
Hide thumbs
Table of Contents

Advertisement

Quick Links

CAVELLO GAS FIRE
CAVELLO XE GAS FIRE

USER INSTRUCTIONS

INSTALLATION INSTRUCTIONS

SERVICE INSTRUCTIONS

It is a regulaon that these instrucons be handed to the customer aer installaon is complete. It is
also the responsibility of the installaon engineer to ensure that the customer is able to fully operate
the appliance and is aware of any cleaning or maintenance requirements.
This product is not suitable for primary heang purposes.
Model numbers: F-031XX1 MANUAL for use on Natural Gas (G20) at a supply pressure of 20 mbar in GB / I.E.
Model numbers: F-031XX2 SLIDE for use on Natural Gas (G20) at a supply pressure of 20 mbar in GB / I.E.
(XX denotes control type, & trim type)
P-XX1520 ISSUE6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F-031XX1 series and is the answer not in the manual?

Questions and answers

Related Manuals for Hearth Products F-031XX1 series

Summary of Contents for Hearth Products F-031XX1 series

  • Page 1: User Instructions

     CAVELLO GAS FIRE CAVELLO XE GAS FIRE USER INSTRUCTIONS INSTALLATION INSTRUCTIONS SERVICE INSTRUCTIONS It is a regulaon that these instrucons be handed to the customer aer installaon is complete. It is also the responsibility of the installaon engineer to ensure that the customer is able to fully operate the appliance and is aware of any cleaning or maintenance requirements.
  • Page 2 ...

  • Page 3: Table Of Contents

      CONTENTS Regulatory Informaon and Installaon Requirements …………………………... 4 Installaon Requirements (connued) ………………………………………………….. 5 Sing the Appliance ……………………………………………………………………………… 6 Fixing the Appliance ...………………………………………………………………………...… 8 Connecng the Appliance to the Gas Supply ……………………………………….. 9 Checking Operaon of Appliance ………………………………………………………… 9 Compleng the Installaon ……………………………………………………………………...

  • Page 4: Regulatory InformaOn And InstallaOn Requirements

    REGULATORY INFORMATION AND INSTALLATION REQUIREMENTS  THE FOLLOWING MUST BE NOTED PRIOR TO THE INSTALLATION OF THIS APPLIANCE. This gas appliance MUST be installed by a GAS SAFE registered installer by law. It must be installed in accordance to these installaon instrucons and the GAS SAFETY (Installaon & Use) REGULATIONS 1998 as amended.

  • Page 5: InstallaOn Requirements (ConNued)

    No purpose made venlaon is normally required for this appliance when installed in G.B. If the appliance is being installed in I.E then refer to I.S 813:1996 (Domesc Gas Installaon—Naonal Standards Authority of  Ireland). Venlaon areas (if applicable) should be checked periodically to ensure there is no obstrucon, ...

  • Page 6: SiNg The Appliance

    SITING THE APPLIANCE  Fireplace Opening The fireplace opening must be between 405mm and 450mm wide and between 555mm and 570mm high. If the opening intended for the appliance is in excess of these dimensions then a suitable surround must be constructed of non-combusble material to produce an opening within this range of dimensions.
  • Page 7 In addion it is imperave that ONLY fascia/trim arrangements supplied by Hearth Products deemed suitable to be used with Hearth Products appliances in a ‘hole in the wall’ installaon shall be used.

  • Page 8: Fixing The Appliance

    If the spillage monitoring device (O.D.S pilot) is replaced it must only be exchanged with a suitable component which is supplied by Hearth Products Ltd.

  • Page 9: ConnecNg The Appliance To The Gas Supply

    Connecng the Appliance to the Gas Supply The gas supply can be connected to the appliance by a concealed fing from the rear. In all installaon condions the gas  connecon should be provided using 8mm (O/D) copper tubing. If the concealed installaon method is chosen, there are three oponal entry points at the rear/side of the appliance.

  • Page 10: CompleNg The InstallaOn

    Compleng the Installaon of the Appliance  Remove the protecve covering (if applicable) from the face of the decorave trim. Fit the trim to the appliance with the magnets provided. One magnet should be placed in each corner of the trim at the top of the appliance and on each side about 120mm from the base of the appliance.

  • Page 11: Appliance Technical InformaOn

    Maintenance of the Appliance The following procedures can and should be performed by the customer at regular intervals depending upon use of the  appliance. Appliance Technical Informaon Gas Type : Natural Gas Category : I2H Inlet Pressure: (Cold) 20mbar Heat Input Gross : 6.75kW Injector : 77 Desnaon Countries : GB/ IE...

  • Page 12: Service InstrucOns

    Cleaning the Appliance (connued)  Trim, Fret and Painted Metal Parts There are a variety of trim and fret opons which may have been supplied with your appliance and these are normally a plated material on a steel substrate. It is important that no abrasive cleaners or chemical agents are used in the cleaning of these components.
  • Page 13 Re-assemble the burner tray into the firebox (see previous page) Only replacement components supplied by the manufacturer should be used in the service of this appliance. Contact details for Hearth Products Ltd can be found on the back page of these instrucons.

  • Page 14: User InstrucOns

    OPERATING INSTRUCTIONS This appliance is available with two operang methods, namely manual control and slide control. The following  instrucons detail both methods of operaon however the basic operaon of the appliance involves the ignion of a pilot burner (See page 8 for spillage monitoring details—ODS), then the control of the main burner with LOW and HIGH sengs.

  • Page 15: Coal Layout InstrucOns

    FUEL BED LAYOUT (COAL) The following instrucons detail how the ceramic fuel bed and loose components are to be installed  onto the appliance. Great care should be taken when handling these ceramic parts as they are fragile and can easily be broken. Do not force any component into posion, if it does not fit easily then you are not fing the part correctly.
  • Page 16 Step 3  Fit the two side cheeks into posion as shown in the picture below. These are marked L and R for le hand and right hand. Step 4 Carefully place four coals between the front rail and the fuel bed as shown in the picture below.
  • Page 17 Step 5 Fit three coals into posion as shown in the picture below.  Step 6 coals into posion as shown in the picture below. Step 7 Fit the three coals into posion as shown in the picture below.

  • Page 18: Pebble Layout InstrucOns

    FUEL BED LAYOUT (PEBBLE)  The following instrucons detail how the ceramic fuel bed and loose components are to be installed onto the appliance. Great care should be taken when handling these ceramic parts as they are fragile and can easily be broken. Do not force any component into posion, if it does not fit easily then you are not fing the part correctly.
  • Page 19 Step 3  Fit the two side cheeks into posion as shown in the picture below. These are marked L and R for le hand and right hand. Step 4 Carefully place medium pebbles from bag ’A’ between the front rail and the fuel bed as shown in the picture below.
  • Page 20 Step 5 Fit three large pebbles from bag marked ’ B’ into posion as shown in the picture below.  Step 6 Fit two large pebbles from bag marked ’ B’ into posion as shown in the picture below. Step 7 Fit the three small round pebbles from bag marked ’C’...

  • Page 21: Product Fiche

    mers are not used. This is not to be confused with the net efficiency, or useful efficiency of the appliance (shown in the tables above). This product MUST be installed by a Gas Safe Registered Installer. Full details are provided in this manual. Hearth Products Ltd. Unit 14 Tollgate Industrial Estate, Stafford, ST16 3SU...

  • Page 22: Spare Parts List

    User Replaceable Parts  Part Number Descripon P-XX1121 Ceramic Fuel Bed-Coal P-XX1122 Ceramic Front Rail-Coal P-XX1123 Ceramic Sidecheek LH-Coal P-XX1124 Ceramic Sidecheek RH-Coal P-XX1125 Ceramic Loose Fuel Pack-Coal P-XX1131 Ceramic Fuel Bed—Pebble P-XX1132 Ceramic Front Rail—Pebble P-XX1133 Ceramic Sidecheek LH-Pebble P-XX1134 Ceramic Sidecheek RH-Pebble P-XX1135...
  • Page 23 ...

  • Page 24: Manufacturer's Contact Details

     Hearth Products Ltd Unit 14 Tollgate Industrial Estate, Stafford, ST16 3SU Www.hearthproducts.co.uk Tel: 01785 225401 Fax: 01785 225501 Email: info@hearthproducts.co.uk Due to our policy of connual product improvement, some diagrams and small details may not be accurate however if there is any...

This manual is also suitable for:

F-031xx2 series

Table of Contents