Auto Meter SB-300 Operator's Manual

Auto Meter SB-300 Operator's Manual

Hand held-accuracy with a 40 amp load, intelligent handheld battery tester

Advertisement

Quick Links

SB-300
Operator's Manual
Hand Held-Accuracy with a 40 Amp Load
The SB-300 is a hand-held tester that is the auto industry's answer to
portability in a professionally accurate battery load tester.
20
T est Equipment

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB-300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Auto Meter SB-300

  • Page 1 � SB-300 Operator’s Manual Hand Held-Accuracy with a 40 Amp Load The SB-300 is a hand-held tester that is the auto industry’s answer to portability in a professionally accurate battery load tester. T est Equipment...
  • Page 2: Table Of Contents

    Immediately determine battery. The SB-300 is a portable full- featured menu-driven battery tester that provides quick, professional load results using Auto Meter's Pulsed Load. The SB-300 is user friendly. It tells you what to do. It is professionally accurate. Detailed test results are LCD displayed after each test and can be reviewed and/ or printed from memory.
  • Page 3: Safety

    Warning! Never attach the SB-300 to a battery that is connected to any other tester Improper use, accident, water damage, abuse, unauthorized repairs or charging unit. Damage may result.
  • Page 4 Using Auto Meter's optional adapter cord AC-12 insert the stereo terminal corrosion, loose plug into the jack on the SB-300 and then plug the serial adapter or broken posts, cracks into a free serial port on the rear of your computer or connect in the case, loose hold- to AC-32 serial port to USB adapter.
  • Page 5: Controls And Functions

    'N' to Print Key: continue. Point the SB-300 infrared print light towards the Optional PR-12 infrared 'N' OR 'Y' printer receiver and press the print key. Test results will be printed. Infrared Print Light:...
  • Page 6: Maintenance

    MAINTENANCE VOLT METER Scroll Down to Volt Meter then select Volt Meter by pressing 'Y' CLAMP MAINTENANCE CHECK OFTEN FOR LOOSE JAWS >VOLT METER OR DAMAGED INTERNAL INSULATOR Press (Y Enter) DOWNLOAD Both jaws of each clamp must firmly engage the battery terminal SETUP The wire soldered to the copper insert jaw must be insulated ABOUT...
  • Page 7: Hook Up

    IR receiver pointed in the direction of the Press the On/Off button: Connect the clamps as SB-300. Press (Print). You should be within 15 ft of the printer. Wait for instructed on the LCD. the screen to clear before moving the SB-300. It takes a moment to send all the test data.
  • Page 8: Voltmeter

    The optional PR-12 printer. An invisible infrared beam links the following screens will appear. SB-300 to the printer from up to 15 ft away. No connection cords are needed. For more instructions on how to operate the printer THE BATTERY consult the printer manual.
  • Page 9: Battery Test

    May not start vehicle in S#23456 T# 1 12.68V CHRG 100% hot or cold conditions. Wait for test results. 'Y' TO CONTINUE The SB-300 serial number and test number are displayed to help reference the test to the print out.

Table of Contents