Registering Data From Outgoing/Incoming Calls - Sanyo W32SA Basic Manual

Registering Data from Outgoing/Incoming Calls

Press r while the standby
screen is displayed.
The Outgoing Calls appears.
If l is pressed while the standby screen is
displayed, the Incoming Calls appears.
Use j to select the
phone number to register
and press G (T).
Use j to select "Reg. to
Adrs. Book" and press
c (3).
"Register New" : Registers new data in the address
"Add'l Register" : Adds or edits existing data and then
Use j to select "Register
New" and press c (3).
The No. Type selection screen appears.
For the subsequent procedure, see steps 6 to 10
on pages 33 and 34.
38
book.
registers the data in the address book.
Ｉ . Ｃ
０１ １６：００ １２／２３
０９００００１ＸＸＸＸ
０２ ９：３０ １２／２２
Ｒｏｂｉｎ Ｓｍｉｔｈ
０３ １１：１５ １２／１４
０９００００２ＸＸＸＸ
０４ ２０：４５ １２／１３
０３０００１ＸＸＸＸ
Outgoing Calls
Ｍｅｎｕ １／２
Ｄｉａｌ
Ｒｅｇ．ｔｏ Ａｄｒｓ．Ｂｏｏｋ
Ｒｅｊｅｃｔ Ｃａｌｌｓ
Ｃｒｅａｔｅ Ｅ−Ｍａｉｌ
Ｃｒｅａｔｅ Ｃ−Ｍａｉｌ
Ｃｏｐｙ Ｐｈｏｎｅ Ｎｏ．
Ｓｅａｒｃｈ Ａｄｒｓ．Ｂｏｏｋ
Ｅｒａｓｅ
Ｒｅｇ．ｔｏ Ａｄｒｓ．Ｂｏｏｋ
Ｒｅｇｉｓｔｅｒ Ｎｅｗ
Ａｄｄ'ｌ Ｒｅｇｉｓｔｅｒ
Ｎｏ． Ｔｙｐｅ
Ｏｔｈｅｒｓ
Ｍｏｂｉｌｅ
ＰＨＳ
Ｈｏｍｅ
Ｗｏｒｋ
ＦＡＸ