Setting The Display For Incoming Calls; Setting The Display For The Standby Mode - Sanyo SCP-7200 Operating Manual

Setting the Display for Incoming Calls

You can set the color or downloaded image (screen saver) data to be shown on the
Incoming Call display.
Follow these steps:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Display, and press Menu/OK.
4. Highlight Incoming Calls, and press Menu/OK.
5. Select the menu under Incoming Calls and press Menu/OK.
6. Highlight your desired color or downloaded image(screen saver), and press Menu/OK.
Get New : start up a Browser and you can select an item to download.
●
If you select the downloaded image (screen saver) data at the step 6 above, press
●
Preview (right softkey) to see an example display.
Note: PCS Connection kit must be purchased for downloading the data from PC.
Setting the Display for the Standby Mod e
This feature enables you to select a variety of items to display on the Standby mode.
Follow these steps:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Display, and press Menu/OK.
4. Highlight StandbyDisplay, and press Menu/OK.
5. Select your desired item, and press Menu/OK.
Screen Saver selects the screen saver to display.
l
Calendar displays the Calendar.
l
Time (Large) displays the local time in a large, simple format.
l
World Clock displays the time of the selected country with the local time. You can
l
scroll the World Clock list by pressing right/left of the Navigation key for changing
country, Summer (left softkey) / Standard (right softkey) for changing between
summer and standard time if applicable. " * " icon is shown in the summer time.
Tip: You can also display the World Clock from Tools/Extras menu. See "Using the
World Clock" on page 64.
Off sets this feature to Off.
l
6. After following each system prompt or confirming the preview display, press
Menu/OK to save the setting.
25