Appendix A: Quick Set-Up Guide For Room Controllers - Bosch FS 100 Manual

6 6 | Bosch Greenstar

Appendix A: Quick Set-up Guide for Room Controllers

CRC100 - Operation
The following table shows how to
change a value in the service menu
of the CRC100
1 = Display
2
= Dial
Open the service menu
1. press and hold dial until two dashes appear.
2. Release dial to displaythe first setting.
Changing the setting (e.g. heating zone H.C)
1. Turn the dial to select a setting.
2. Press dial to show the current value.
3. Press dial to change the value.
4. Turn dial to set the required value.
5. Press the dial to store the value.
6. Press and hold dial until the setting is displayed again.
Close the service menu
1. Press and hold idal until three dashes appear.
2. Release dial.
The display changes to the standard display, and the
user interface works with the changed setting.
Data subject to change
1
67.0 °F
2
A . 1
H.C
3
3
2
2
H.C
67.0
Applications Manual
°F
Bosch Thermotechnology Corp.