GE 28031xx2 User Manual page 20

r A
inGs to nswer
This feature lets you select the number of times you want the phone to ring before
the answering system answers a call.
1. Press the CALLER ID-VOLUME ( 6 or 5)
menu.
2. Press MUTE/PROG button to enter the menu. RING TO ANSWER 3 4 5 6 TS shows in
the display.
3. Use the CALLER ID-VOLUME ( 6 or 5)
default setting is 5.
4. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the
new setting shows in the display.
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there
are NEW messages, OR the unit answers after the 5th ring if there are NO new
messages. This allows user to access their answerer from another location
and then hang up after 4 rings to save long distance charges.
s c
ecuritY oDe
You can access the answering system from a tone dialing telephone
in another (remote) location. The security code is required for re-
mote access, and it prevents unauthorized access to your answering
system.
1. Press the CALLER ID-VOLUME ( 6 or 5)
2. Press MUTE/PROG button to enter the menu. SECURITY CODE 1 2 3 shows in the
display.
3. Use the touch-tone pad to enter your new 3-digit security code. The default setting
is 123.
4. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the
new security code shows in the display.
NOTE: If you make a mistake, use the DELETE button to backspace and erase
the wrong digit.
A c
reA oDe
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the AREA CODE sub-menu.
2. Press MUTE/PROG button to enter the menu. SET AREA CODE - - - shows in the
20
(
for AnswerinG sYstem
(
for AnswerinG sYstem
)
button to scroll to the RING TO ANSWER
button to scroll to the your selection. The
)
button to scroll to the SECURITY CODE sub-menu.
sub-