Advertisement
Quick Setup
Connect your CellSpot to the Internet
1
Connect the yellow Ethernet cable from the "WAN"
yellow port on your CellSpot to an available Ethernet
port on your Wi-Fi router or Wi-Fi cable modem router.
Connect GPS antenna to the CellSpot
2
Connect the GPS antenna cable to the GPS port.
Position the antenna as close to a window as possible.
(You'll attach the GPS antenna and cable to the bracket
after installation is complete.)
Power on your 4G LTE CellSpot
3
Plug in your AC power adaptor into the power outlet and
connect the power cable to the CellSpot power port.
11.7"
Let your CellSpot set up
4
After you power on your CellSpot, the CellSpot will go
through self-installation process. It can take up to 45
minutes to complete the device setup. Your CellSpot
may download updates and could restart during
this time.
• Power (Solid Green): Power on. Device self testing
and update complete.
• Internet (Solid Green): Successful internet
connection.
• Status (Solid Green): Successful connection
established with T-Mobile network.
• GPS (Solid Green Optional): GPS position locked if
GPS signal is present. Device can still proceed
through setup without GPS signal lock and operate
normally.
• 3G/4G (Solid Green): Device is ready to provide
3G/4G service.
• 4G LTE (Solid Green): Device is ready to provide
4G LTE service.
Congratulations! Your CellSpot setup is complete.
Make your first 4G LTE CellSpot call with your 3G, 4G or
4G LTE capable devices. Just use your mobile device as
you normally do and enjoy the improved coverage, more
dependable voice calls and a more reliable high speed
data connection.
8.25"
2
1
3
4
INSIDE - RIGHT
2
Advertisement
