Specifications - Sharp Disney Mobile DM003SH User Manual

Specifications

Specifications

Disney Mobile DM003SH
Approximately 124 g
Weight
Continuous Approximately 250 minutes (3G)
Talk Time Approximately 230 minutes (GSM)
Continuous Approximately 340 hours (3G)
Standby Approximately 310 hours (GSM)
Time (handset closed)
AC Charger: Approximately
Charging Time 140 minutes
(power off) In-Car Charger: Approximately
140 minutes
Approximately 50 x 105 x 18.1 mm
Dimensions
(handset closed, without protruding
(W x H x D)
parts)
Maximum 0.25 W (3G)
Output 2.0 W (GSM)
. Above values calculated with battery installed.
. Continuous Talk Time is an average
measured with a new, fully charged battery,
with stable signals.
. Continuous Standby Time is an average
measured with a new, fully charged battery,
with handset closed without calls or
14
operations, in Standby with stable signals.
. Talk Time/Standby Time may vary by
environment, status, settings, etc.
. Display employs precision technology,
however, some pixels may appear brighter/
darker.
18
14-
[ Handset Materials
Parts Materials & Finishing
Nylon resin/SUS
Housing (Display side, (insert-molded),
Keypad side) discontinuous
deposition/UV painting
Housing (Display back
ABS resin, discontinuous
hinge, hinge;
deposition/UV painting
Illumination Light area)
Acrylic resin/UV hard
Housing (Display back)
coating (in-mold decoration)
Housing (battery side), Nylon resin, UV painting,
Battery Cover printed
Display window,
camera lens, External Acrylic resin
Display window
Camera ornament
(Infrared Port, Mobile
Light), Start Key, Power
On/Off Key, Mail Key,
PC resin
D Key, Shortcuts & A/a
Key, Clear/Back Key, TV
& Text Key, Multi Job &
Manner Key, Keypad
Battery Cover Lever POM resin
Center Key, Multi Aluminum, anodized
Selector aluminum paint
Side Keys PC resin, UV painting
External Device Port PC resin/Elastomeric
Cover, Headphone Port resin, discontinuous
Cover deposition/UV painting
SUS/Gold plating
Charging Terminals
(sealer: nickel)
Parts Materials & Finishing
SWCH12A/Trivalent
Screw (all pieces) chromate, EPDM O-ring
seal
Copper alloy/Gold
USIM pin
plating (sealer: nickel)
Accessories
[ Battery
Voltage 3.7V
Battery Type Lithium-ion
Capacity 770 mAh
Dimensions Approximately 37.3 x 44.8 x 4.7 mm
(W x H x D) (without protruding parts)
[ Desktop Holder
Input Voltage/
DC 5.4V/700 mA
Current
Output Voltage/
DC 5.4V/700 mA
Current
Charging
5oC to 35oC
Temperature
Dimensions Approximately 76 x 105 x 68 mm
(W x H x D) (with Stand attached)