Related Manuals for Xiamen HT300
Summary of Contents for Xiamen HT300
- Page 1 Label Printer User Manual HT300 HT330 Xiamen Hanin Electronic Technology Co.,Ltd ADD: Room 305A,Angye Building,Pioneering Park, Torch High-tech Zone,Xiamen,China. Tel.: +86-(0)592-5885993 Fax: +86-(0)592-5885992 Web: www.hprt.com...
-
Page 2: Table Of Contents
Contents Manual Information........................1 Important Safety Instructions......................2 Chapter 1 Introduction........................5 1.1 Packing List.........................5 1.2 Appearance and Components................... 6 1.3 Dimension.......................... 8 Chapter 2 Specifications......................... 9 Chapter 3 Installation & Usage..................... 11 3.1 Media Loading......................... 11 3.2 Power Connection......................16 3.3 Peripherals Connection....................17 3.4 Detection..........................18 3.5 Operation Panel....................... - Page 3 Without any written permission from our company, any section of this manual is prohibited to be copied or transferred in any form. Copyright This manual is printed in 2016, the copyright belongs to Xiamen Hanin Electronic Technology Co. Ltd. Printed in China 1.0 Version...
-
Page 4: Manual Information
Manual Information This user manual contains basic information for product usage as well as for emergency measures that may be required. The installation and usage of printer driver, utility tool and HPRT BarTender® Ultralite are also included in the manual. -
Page 5: Important Safety Instructions
HT300/HT330 User Manual Important Safety Instructions Before using the present appliance, please carefully read the following safety regulations in order to prevent any hazard or material damage. 1.Safety warning Warnings: The print head will become very hot during printing; avoid contact with the print head after printing has finished. - Page 6 HT300/HT330 User Manual Caution: Violating following instructions may cause slight damage of the appliance. 1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking following measures. • Switch off the printer and unplug the set from the mains.
- Page 7 HT300/HT330 User Manual • Keep this User Manual in a place which is easily accessible at all times. 3.Other Precautions The copyright for this user manual and various other manuals is property of our company. Any copying or conversion into electronic form and saving of this material without the express written permission is strictly prohibited.
-
Page 8: Chapter 1 Introduction
HT300/HT330 User Manual Chapter 1 Introduction 1.1 Packing List Note: 1.Unpack the printer and keep the packing materials in case you need to ship the printer in the future. 2.Any damages exist, please contact the local dealer. Printer AC Adapter... -
Page 9: Appearance And Components
HT300/HT330 User Manual 1.2 Appearance and Components ￭ Front View ￭ Rear View Rev.1.0... - Page 10 HT300/HT330 User Manual ￭ Inside View Note：The views above are for your reference. Ports vary by your choice. Rev.1.0...
-
Page 11: Dimension
HT300/HT330 User Manual 1.3 Dimension Rev.1.0... -
Page 12: Chapter 2 Specifications
HT300/HT330 User Manual Chapter 2 Specifications (2/1) Items Parameter HT300 HT330 Thermal transfer Thermal transfer Printing method / Direct thermal /Direct thermal Resolution 203dpi(8dots/mm) 300dpi(11.8dots/mm) Printing Printing speed 127mm/s Max. 102mm/s Max. Printing width 108mm Max. 106mm Max. Printing length... - Page 13 HT300/HT330 User Manual (2/2) Items Parameter 90°, 180°, 270° rotatable, single characters 90°, 180°, Bitmap fonts 270° rotatable Download Fonts 16x16, 24x24. Traditional Chinese, Simplified Asian fonts Chinese, Japanese , Korean DOS437,720,737,755,775,850,852,855,856,857,858,8 60,862,863,864,865,866, Windows Code Pages 1250,1251,1252,1253,1254,1255,1256,1257,1258 ISO8859-1,-2,-3,-4,-5,-6,-8,-9,-15 DBCS 932 (JIS), 936(GBK), 949 (Koran), 950(BIG5)
-
Page 14: Chapter 3 Installation & Usage
HT300/HT330 User Manual Chapter 3 Installation & Usage 3.1 Media Loading 3.1.1 Paper Roll Loading 1.Press the cover open buttons and lift the printer cover. Release the latches and lift the printer mechanism. Rev.1.0... - Page 15 HT300/HT330 User Manual 3.Put the roll into label supply spindle and then put the roll module into the printer. 4.Release and lift the printer mechanism. Then pass the labels through label guides and adjust label guides to label’s width. Note: If your printer is under Thermal Line Printing Method, press down the printer cover until it snaps closed.
- Page 16 HT300/HT330 User Manual 3.1.2 Ribbon Loading 1.After putting the ribbon into spindle, insert the left side of supply module into supply wheel, and then insert the right side into the groove below. 2.After putting empty ribbon core into spindle, insert the left side of rewind module into rewind wheel, and then insert the right side into the groove above.
- Page 17 HT300/HT330 User Manual 3.Pull up the ribbon and stick it to the empty ribbon core. Wind the core 2~3 circles until the ribbon is pulled tightly. 4.Fix the mechanism and then close the cover. Rev.1.0...
- Page 18 HT300/HT330 User Manual 3.1.3 External Paper Roll Loading If the paper roll is extremely large, users can load the paper roll outside(See the graph at right). Pass the paper through the external feed slot and then through paper guides. Adjust...
-
Page 19: Power Connection
HT300/HT330 User Manual 3.2 Power Connection 1. Make sure the printer’s power switch is in the off position. 2. Connect the AC adapter to power receptacle. 3. Connect the power cord to AC adapter. 4. Connect the other end of power cord to the outlet. -
Page 20: Peripherals Connection
Detailed pairing methods, please refer to primary devices Bluetooth Names. After pairing, primary devices with virtual Bluetooth interface (smart phone , pocket PC, palm, notebook) can drive mobile thermal printer HT300 or HT330 to printer through such virtual Bluetooth interface. -
Page 21: Detection
HT300/HT330 User Manual 3.4 Detection When printing paper, the moveable label sensor is used to detect paper. The label sensor moves differently when using various kinds of paper. If user moves the sensor improperly, paper may not be detected, therefore the printer could not print paper. The following instructions tell users how to use label sensor correctly. - Page 22 HT300/HT330 User Manual Figure 2 (Left) Rev.1.0...
- Page 23 HT300/HT330 User Manual 3.4.2 Double-row Labels When printing double-row labels(Figure 3), the sensor shall be aimed at the left photoelectric hole (Figure 4), which is the original position. Figure 3 (Double-row Labels) Rev.1.0...
- Page 24 HT300/HT330 User Manual Figure 4 (Left) Rev.1.0...
- Page 25 HT300/HT330 User Manual 3.4.3 Punched Hole Label When printing punched hole labels, move the sensor until it’s aimed at the right photoelectric hole(Figure 5). Figure 5 (Right) Rev.1.0...
- Page 26 HT300/HT330 User Manual 3.4.4 Label When printing labels (thermal label/label)(Figure 6), the sensor shall be aimed at the left photoelectric hole (Figure 7), which is the original position. Figure 6 (Labels) Rev.1.0...
- Page 27 HT300/HT330 User Manual Figure 7 (Left) Rev.1.0...
- Page 28 HT300/HT330 User Manual 3.4.5 Blackmark Paper When printing blackmark paper(Figure 8), the sensor shall be aimed at the position of black mark(Figure 9). Figure 8 (Blackmark Paper) Rev.1.0...
- Page 29 HT300/HT330 User Manual Figure 9 (aimed at blackmark’s position) Rev.1.0...
-
Page 30: Operation Panel
HT300/HT330 User Manual 3.5 Operation Panel Rev.1.0... - Page 31 HT300/HT330 User Manual Description of indicator status: Ready Status Color Action Color Action Indicator Status Green Lit on Ready Green Slow flash Dump mode Lit on Overheat of printhead Slow flash Ribbon out Lit on Head up Slow flash Paper out...
-
Page 32: Basic Operation
HT300/HT330 User Manual 3.6 Basic Operation 3.6.1 Power on/power off Press “O” to power off the printer. Press “l”to power on the printer. 3.6.2 Feed Button Pressing FEED button, printer will feed paper to the specified position according to the paper type. - Page 33 HT300/HT330 User Manual 3.6.4 Printing Self-test Page The self-test checks the printer’s current settings, status and whether the printer has any problems or not. 1.Printing Manually 1) Make sure the roll is loaded properly. 2) Make sure the top cover and mechanism of the printer are closed properly. Then turn on the printer.
-
Page 34: Chapter 4 Interface
HT300/HT330 User Manual Chapter 4 Interface 4.1 USB Interface SIGNAL NAME VBUS Rev.1.0... -
Page 35: Other Optional Interfaces
HT300/HT330 User Manual 4.2 Other Optional Interfaces Serial Port SIGNAL NAME Rev.1.0... - Page 36 HT300/HT330 User Manual Ethernet Port SIGNAL NAME Rev.1.0...
-
Page 37: Chapter 5 Maintenance & Adjustment
HT300/HT330 User Manual Chapter 5 Maintenance & Adjustment Adhesives and coatings of the media can transfer to the printer parts over time along the media path including the thermal print head and media sensor. This build-up can accumulate dust and debris. Failure to clean the print head, media path, and media sensor could result in inadvertent loss of labels, label jams and possible damage to the printer. -
Page 38: Cleaning Roller And/Or Paper Path
HT300/HT330 User Manual 5.3 Cleaning Roller and/or Paper Path 1) Open the printer cover and then remove the paper. 2) Remove any dust or foreign substance using dry cloth or cotton swab. 3) Soak the cloth or cotton swab in alcohol for medical use and use it to remove adhesive foreign substances or other pollution materials. -
Page 39: Chapter 6 Label Printer Utility Instructions
Download the application program in CD. eg: HPRTUtilityForLabel_Channel V2.0.0.2. 6.2 Usage Note: The screen may vary slightly by different operating systems and models. Take HT300 as example. Please refer to HT300 when using HT330. (1)Install “HPRTUtilityForLabel_Channel V2.0.0.2.exe”, then open the “HPRTUtility”. - Page 40 HT300/HT330 User Manual (2)Add/Modify/Delete Printer, Connect Test. ●Click “Add Printer”. Choose the printer and port(eg: USB), then click “OK”, showed in “Printer List”. Rev.1.0...
- Page 41 HT300/HT330 User Manual ●Click “Modify Printer”. Choose the printer and port(eg: COM1), then click “OK”, showed in “Printer List”. Rev.1.0...
- Page 42 HT300/HT330 User Manual ●Click “Delete Printer”. Click “OK” to delete the printer, and click “Cancel” to cancel the command. ●Click “Connect Test” to test whether the connection is successful or not. If connection succeeds, it shows as follows. If connection fails, it shows as follows.
- Page 43 HT300/HT330 User Manual (3)Function. ●Click “Printer Information”, showing printer information.(varies by different printers) ●Click “Print Test Text”. Type the text and set up the printing range. Click “Print”, then printer starts to print the test text. ●Click “Print Self Information”, then printer starts to print self-test page.
- Page 44 HT300/HT330 User Manual BT Config: Ethernet Setting: Rev.1.0...
- Page 45 HT300/HT330 User Manual Print type: Reprint when error: Rev.1.0...
- Page 46 HT300/HT330 User Manual Label paper automatic position when power on: Judge paper mode: Rev.1.0...
- Page 47 HT300/HT330 User Manual Print density(range:0-15): Heat Adjust(range:-50—50): Rev.1.0...
- Page 48 HT300/HT330 User Manual Print Speed(range:2345): Protocol: Click “Set”, and back to the main menu. ●Click “Restore Factory Settings”. Click “OK” to restore factory settings, and click “Cancel” to cancel the command. (4)Click “Quit”, and finish printer settings. Rev.1.0...
-
Page 49: Chapter 7 Seagull Windows Driver Instructions
HT300/HT330 User Manual Chapter 7 Seagull Windows Driver Instructions 7.1 Introduction The following operating systems are supported: Microsoft Windows 10 (32 bit/64 bit) Microsoft Windows 8 (32 bit/64 bit) Microsoft Windows 7 SPI (32 bit/64 bit) Microsoft Windows Vista SP2 (32 bit/64 bit) -
Page 50: Installation
Under different operating systems, the screen may be slightly different. Take Windows 7 as example. Take HPRT HT300 as example. Please refer to HPRT HT300 when using HPRT HT330. To avoid the prevention, recommend to close the security software before installation. - Page 51 HT300/HT330 User Manual 5.Choose the installation directory, then click “Next”. 6.Click"Finish". Rev.1.0...
- Page 52 HT300/HT330 User Manual 7.Select "Install printer drivers", then click "Next". Note: If you have connected the printer to computer, it will detect and install the driver automatically.(eg.: USB port) 8.Select "Install a driver for a Plug and Play printer”, then click "Next".
- Page 53 HT300/HT330 User Manual 9.Enter a name for this printer, then click "Next". 10.Click"Finish". Rev.1.0...
- Page 54 HT300/HT330 User Manual 11.Click "Close", and the HPRT HT300 Label printer driver is installed successfully. 12.After installation, the icon will be found in ”Start”→“Devices and Printers”. Note: 1.If you have already installed the driver (No matter what kind of ports), it will generate a USB port automatically when connecting the printer to computer.
-
Page 55: Usage
HT300/HT330 User Manual 7.4 Usage 7.4.1 Printing Preferences 1.Click “Start”→“Devices and Printers”. Right click “HPRT HT300” and choose “Printing preferences”. Rev.1.0... - Page 56 HT300/HT330 User Manual 2.According to different needs, set up the page. Rev.1.0...
- Page 57 HT300/HT330 User Manual Click “Stock”→”Name”, and choose the paper type. ● Click “New Stock”, and set up a new stock. ● Rev.1.0...
- Page 58 HT300/HT330 User Manual Click “Edit Stock”, and edit the stock. ● Click “Delete Stock”, and delete the stock. ● Rev.1.0...
- Page 59 HT300/HT330 User Manual Choose “Orientation” or “Effects”, showed in the “Preview”. ● Rev.1.0...
- Page 60 HT300/HT330 User Manual Click “Preset”→“Name”, and back to the default settings. ● Click “Manage”, and change the settings. ● Rev.1.0...
- Page 61 HT300/HT330 User Manual 3.Click “Graphics”, and edit the pictures. Rev.1.0...
- Page 62 HT300/HT330 User Manual 4.Click “Stock”. Rev.1.0...
- Page 63 HT300/HT330 User Manual Click “Method”, and choose the printing method. ● Rev.1.0...
- Page 64 HT300/HT330 User Manual Click “Type”, and choose the printing type. ● Rev.1.0...
- Page 65 HT300/HT330 User Manual Click “Post-Print Action”, and choose the method of media handing. ● Rev.1.0...
- Page 66 HT300/HT330 User Manual 7.4.2 Printer Properties 1.Click “Start”→“Devices and Printers”. Right click “HPRT HT300” and choose “Printer properties”. Rev.1.0...
- Page 67 HT300/HT330 User Manual 2.Click “General”→“Print Test Page”, and printer will print labels with current settings. Rev.1.0...
- Page 68 HT300/HT330 User Manual 7.4.3 Print Server Properties 1.Click “Start”→“Devices and Printers”. Then click “Print server properties”. Rev.1.0...
- Page 69 HT300/HT330 User Manual 2.Click “Create a new form”, write in “Form name” and edit width and height in “Paper size”. Finally, click “Save Form”. Rev.1.0...
- Page 70 HT300/HT330 User Manual 3.The new label form is showed in “Forms on”. Rev.1.0...
-
Page 71: Label's Width
HT300/HT330 User Manual 7.5 Label’s Width USER(4.00 in×4.00 in) 2×4(2.00 in×4.00 in) 4×4(4.00 in×4.00 in) 4×6(4.00 in×6.00 in) Rev.1.0... -
Page 72: Chapter 8 Bartender® Ultralite Instructions
HT300/HT330 User Manual Chapter 8 BarTender® Ultralite Instructions 8.1 Introduction This chapter provides instructions on BarTender® Ultralite program according to PC operating systems(OS). The followings are supported. Microsoft Windows 10 (32 bit/64 bit) Microsoft Windows 8 (32 bit/64 bit) Microsoft Windows 7 SPI (32 bit/64 bit) -
Page 73: Installation
Under different operating systems, the screen may be slightly different. Take Windows 7 as example. Take HPRT HT300 as example. Please refer to HPRT HT300 when using HPRT HT330. To avoid the prevention, recommend to close the security software before installation. - Page 74 HT300/HT330 User Manual 4.Click " Next". 5.Read and accept the license agreement, then click "Next". Rev.1.0...
- Page 75 HT300/HT330 User Manual 6.Select "Features" and Installation Location, then click "Next". 7.Click "Install". Rev.1.0...
- Page 76 HT300/HT330 User Manual 8.Click “Finish”. 9.Back to desktop, and you will see the icon of BarTender®. Dobule click it, and start to use. Rev.1.0...
-
Page 77: Usage
HT300/HT330 User Manual 8.4 Usage 8.4.1 Page Settings 1.Double click the icon, then choose the edition. Click “OK”. (The edition may be changed according to different needs.) 2.Click “Start a new BarTender document”. Rev.1.0... - Page 78 HT300/HT330 User Manual 3.Choose “Blank Template”, then click “Next”. Rev.1.0...
- Page 79 HT300/HT330 User Manual 4.Choose the printer type, then click “Next”. Rev.1.0...
- Page 80 HT300/HT330 User Manual 5.If the predefined stocks don’t meet your need, tick “Specify Custom Settings”. Then click”Next”. Rev.1.0...
- Page 81 HT300/HT330 User Manual 6.Tick “Single item per page”, then click “Next”. (If you print multiple labels, tick “Multiple columns and/or rows of items per page ”.) Rev.1.0...
- Page 82 HT300/HT330 User Manual 7.Edit the side edges, then click “Next”. Rev.1.0...
- Page 83 HT300/HT330 User Manual 8.Choose the item shape, then click “Next”. Rev.1.0...
- Page 84 HT300/HT330 User Manual 9.Edit the template size, then click “Next”. Rev.1.0...
- Page 85 HT300/HT330 User Manual 10.Based on your need, edit the template background. Then click ”Next”. Rev.1.0...
- Page 86 HT300/HT330 User Manual 11.Finish the settings, showed in the “Review” and “Preview”. Then click “Finish”. Rev.1.0...
- Page 87 HT300/HT330 User Manual 8.4.2 label Edit Click the icon of code 2.Choose the code, then click “Select”. Rev.1.0...
- Page 88 HT300/HT330 User Manual 3.Click the blank, showing the code. Rev.1.0...
- Page 89 HT300/HT330 User Manual 4.Double click the code and edit it. Rev.1.0...
- Page 90 HT300/HT330 User Manual Click “Symbology and Size”, then edit the size. ● Rev.1.0...
- Page 91 HT300/HT330 User Manual Click “Human Readable”, then edit the position. ● Rev.1.0...
- Page 92 HT300/HT330 User Manual Click “Font”, then edit the character. ● Rev.1.0...
- Page 93 HT300/HT330 User Manual Click “Text Format”, then edit the paragraph. ● Rev.1.0...
- Page 94 HT300/HT330 User Manual Click “Border”, then edit the border. ● Rev.1.0...
- Page 95 HT300/HT330 User Manual 5.Click the icon of character , then enter the text. Rev.1.0...
- Page 96 HT300/HT330 User Manual 6.Click the icon of picture , then edit the pictures. Rev.1.0...
- Page 97 HT300/HT330 User Manual 7.Compose the text. 8.Finish all the settings. Click “Print” and a new label has been printed. Rev.1.0...
Need help?
Do you have a question about the HT300 and is the answer not in the manual?
Questions and answers