Accessories; Specifications; Service Information; Pressure Washer - Simpson PS3228 Instruction Manual

Table of Contents

Advertisement

NOTE: Using a pump protector/winterizer or RV antifreeze is to provide proper
lubrication to the internal seals of the pump regardless of temperature or
environment.

PRESSURE WASHER

1.
Drain all water from high pressure hose and wrap it onto hose wrap.
2.
Drain all water from the spray gun and wand by holding spray gun in a vertical
position with nozzle end pointing down and squeezing trigger. Store in gun
holder.
3.
Wrap up and secure detergent siphon hose so it is protected from damage.
DANGER: Risk of fluid injection. When using replacement spray wands or
guns with this pressure washer, DO NOT use a spray wand and/or spray gun/
wand combination that is shorter in length than what was provided with this
pressure washer as measured from the nozzle end of the wand to the gun
trigger.
NOTICE: The use of any other accessory not recommended for use with this tool
could be hazardous. Use only accessories rated equal to or greater than the rating
of the pressure washer.
MODEL
PSI Max*
GPM Max*
High Pressure Hose
Presure of Inlet Water
Inlet Water
Soap Consumption Rate
*
Pressure and Flow Ratings tested in accordance to PWMA standards.
In our effort towards continuous improvement, specifications are subject to change
without notice.
Do not return this product to your retailer. Please contact our customer service
department at www.simpsoncleaning.com
Please contact us for further information at www.allpartsinc.com

ACCESSORIES

SPECIFICATIONS

PS3228
3200 psi
2.8 gpm
25 ft. (7.6 m)
20–100 psi
cold tap
10% max

SERVICE INFORMATION

18- ENG

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents