Introduction; Package Contents - Avaya 10-Watt Installation And Use Manual

Telephone Paging Amplifier

Introduction

Package Contents

Before You Start
This document describes the Avaya 10-watt Telephone Paging Amplifier.This is a full-
featured, wall-mounted amplifier that provides inputs for dry loop 600-ohm
telephone page signal and background music source. A set of control inputs allow
an external contact closure to mute background music and open the telephone page
channel. Background music mute level during page is adjustable and the music slowly
fades back in after the page is completed. An automatic level control system limits
the output level of the telephone page channel so that differences in the volume of
the paging party's voice will be less noticeable. A tone control is provided for
optimizing tonal balance for the specific installation. This amplifier includes a built-in
night bell that can be triggered by an external contact closure. The night bell mutes
the background music, but not pages.
* Telephone Paging Amplifier unit
* 2 mounting screws
* Installation and Use Manual
Review the contents of the box. Read through this entire manual to understand how
to install and operate this product.
NOTE: Use minimum 22 AWG shielded, twisted pair wire for your speaker runs.
Page 4 of 8
Figure 1: Telephone Paging Amplifier