Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Adams e-AVR series
Summary of Contents for Adams e-AVR series
-
Page 1: User Manual
USER MANUAL ADAMS AVR e-SERIES Uninterruptible Power Systems... -
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS DESCRIPTION OF THE SYMBOLS USED IN THIS MANUAL INTRODUCTION 3.1. Preliminary warnings to use the STABILIZER MONTAGE & OPERATING MAINTENANCE & CLEANING TROUBLESHOOTING STORAGE TECHNICAL SPECIFICATIONS... -
Page 3: Safety Warnings
1- SAFETY WARNINGS For the user’s own safety, the safety of data and this product read the following safety instructions carefully before using the unit! This system has been designed to provide all the necessary safety conditions needed to protect electronic office equipment including information systems. In case of any questions, refer to your authorized technical service representative. -
Page 4: Description Of The Symbols Used In This Manual
- Do not connect any consumer loads to the STABILIZER, which exceed its power range. - Read the instructions carefully in the “Maintenance & Cleaning” section when cleaning the STABILIZER. - Leave at least a distance of 30 cm between the STABILIZER and the walls in order to maintain adequate air-flow . -
Page 5: Introduction
3- Introduction ADAMS STABILIZER is designed for unstable mains and safety of load. Mains input and output are written on clemenses. When installing the STABILIZER it is necessary to use a connection cable of suitable diameter to use the STABILIZER more effective. -
Page 6: Montage & Operating
4- MONTAGE & OPERATING Check if the STABILIZER has been subjected to any damage before unpacking it. If you notice any damage then contact to transport firm. Check if all the spare parts have been supplied with the STABILIZER. Delivered pack includes: •... -
Page 7: Maintenance & Cleaning
5- MAINTENANCE & CLEANING For user no need to the maintenance to STABILIZER. Only on periodical, clean the dust on the fan with a vacuum. Do the cleaning during the input fuses OFF and BYPASS switch is in “ 0 “ position for human health. -
Page 8: Technical Specifications
8- TECHNICAL SPECIFICATIONS ENVIRONMENT CONDITIONS: Protection Type is IP 20 Temperature: Operating - 5 °C....+ 55°C Storage - 30°C....+ 70°C Relative Humidity: Operating ..20% 90% Storage 20%....95% Do not operate when mist is formed ! Leave enough space for ventilation around the STABILIZER: Front 30 cm Back...
Need help?
Do you have a question about the e-AVR series and is the answer not in the manual?
Questions and answers