http://202.224.189.179/view_new/OT/KX-TS2365RUB/SVC/s1803000000.html
18.3 Removing Solder from Between Pins
TOP PREVIOUS NEXT
1. Add a small amount of solder to the bridged pins.
2. With a hot iron, use a sweeping motion along the flat part of the pin to draw the solder from
between the adjacent pads.
TOP PREVIOUS NEXT
http://202.224.189.179/view_new/OT/KX-TS2365RUB/SVC/s1803000000.html11.02.2008 12:59:21