Copy Mode - Delptronics Trigger Man User Manual

V2
Trigger Man User Manual
8 of 20

Copy Mode

Any pattern can be copied to any other pattern. Copy mode is available from Algorithmic, Step Edit, or
Pattern Play mode, but not when the module is in Configuration or Action mode.
To access Copy mode, press both knobs at the same time, then release both knobs. The knobs do not
have to be pressed exactly simultaneously. You can press and hold Knob 1 then press Knob 2, or press
and hold Knob 2 then press Knob 1. The Mode LEDs will flash in a distinctive way to indicate that the
module is in Copy mode.
While the module is in Copy mode, the Step LEDs indicate which pattern to copy from, and which
pattern to copy to. We will call them the source pattern and the destination pattern. The source pattern
is indicated by a steadily lit LED. The destination pattern is indicated by a blinking LED.
If only one LED is illuminated, and it is blinking, then that means that the source and destination
patterns are the same. Performing the copy in that case will have no effect.
Turn Knob 1 to select the source pattern.
Turn Knob 2 to select the destination pattern.
Press Knob 1 or 2 to perform the copy. The destination pattern then becomes the current pattern. The
module returns to the mode it was in when the copy mode was initiated.
Press the Mode Button to cancel without copying anything.