FlashLogic FLRSBA PRESTIGE Product Manual
  1. Manuals
  2. Brands
  3. FlashLogic Manuals
  4. Car Alarm
  5. FLRSBA PRESTIGE
  6. Product manual

FlashLogic FLRSBA PRESTIGE Product Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2017
PRODUCT GUIDE
FLRSBA
DOCUMENT NUMBER
REVISION DATE
20171103
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from
improper installation of this product, be that either damage to the vehicle itself or to the
installed device. This device must be installed by a certified technician. Please review the
Installation Guide carefully before beginning any work.
www.idatalink.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLRSBA PRESTIGE and is the answer not in the manual?

Questions and answers

Summary of Contents for FlashLogic FLRSBA PRESTIGE

  • Page 1 PRODUCT GUIDE FLRSBA DOCUMENT NUMBER REVISION DATE 20171103 NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
  • Page 2 PAGE 2 OF 52 GETTING STARTED - 1 OF 2 • 20171103 WELCOME TABLE OF CONTENTS PRESTIGE Congratulations on the purchase of your FLRSBA solution. You are now a few simple steps away Box Contents from enjoying your new remote starter unit with enhanced features.
  • Page 3 PAGE 3 OF 52 GETTING STARTED - 2 OF 2 • 20171103 TABLE OF CONTENTS CODE ALARM Box Contents 33-34 Compatible Accessories Tach Programming Procedure Remote Programming Procedure 37-38 Valet Mode Programming Procedure Online Module Settings Module Diagnostics Remote Starter Error Codes Module Reset Procedure DIRECTED Box Contents...
  • Page 4 PAGE 4 OF 52 BOX CONTENTS - 1 OF 1 • 20171103 BOX CONTENTS 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT MODULE...
  • Page 5 MODULE MOBILE DEVICE 4 PIN BLACK CABLE PORT OBDII CONNECTOR FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: 1-LOG INTO YOUR WEBLINK ACCOUNT.
  • Page 6 PAGE 6 OF 52 COMPATIBLE ACCESSORIES - 2 OF 2 • 20171103 PRESTIGE: PE1B, PE1BTW, PE2LED, PE2LCD, PE5B RF KIT SOLD SEPARATELY MODULE ANTENNA CARLINK: ASCL6, ASCLBTLR TELEMATIC KIT SOLD SEPARATELY MODULE (NC) U.S. Patent No. 8,856,780 PRESTIGE Automotive Data Solutions Inc. © 2017 FLRSBA www.idatalink.com...
  • Page 7 PAGE 7 OF 52 TACH PROGRAMMING PROCEDURE - 1 OF 1 • 20171103 START vehicle for 15 seconds. ON START START START ENGINE START STOP Press and hold the brake pedal. Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.) Wait, LED 2 will fl...
  • Page 8 PAGE 8 OF 52 TYPE 1 - REMOTE PROGRAMMING - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Press once [1x] on LOCK button of aftermarket Remote Programming completed. and PURSUIT RF kits. It programs aftermarket remote.
  • Page 9 PAGE 9 OF 52 TYPE 1 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Valet Mode completed. and PURSUIT RF kits. It triggers the Valet Mode for remote start only. NOTE: In Valet Mode, the Remote starter is not To exit valet mode, repeat steps 2 to 4.
  • Page 10 PAGE 10 OF 52 TYPE 2 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Valet Mode completed. and PURSUIT RF kits. It triggers the Valet Mode for alarm only. NOTE: In Valet Mode, the alarm is disabled To exit valet mode, repeat steps 2 to 3.
  • Page 11 PAGE 11 OF 52 TYPE 3 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Valet Mode completed. and PURSUIT RF kits. It triggers the Valet Mode for remote start and alarm if the alarm override option is set to valet switch (Menu 3, Option 22).
  • Page 12 PAGE 12 OF 52 TYPE 4 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Cycle ignition ON once [1x ON/OFF] rapidly. and PURSUIT RF kits. It triggers the Valet ON START Mode with a custom code override.
  • Page 13 PAGE 13 OF 52 TYPE 5 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Press the antenna programming button up and PURSUIT RF kits. It sets a new custom to 9 times, to set the tenths digit from 1 to 9. code override to trigger the Valet Mode.
  • Page 14 PAGE 14 OF 52 ONLINE MODULE SETTINGS - 1 OF 1 • 20171103 WEB PROGRAMMABLE MENUS DESCRIPTION MENU 1 – Remote Starter RS related confi guration options MENU 2 – Doorlock Options Convenience feature confi guration options MENU 3 – Security Options Alarm activation and settings MENU 4 –...
  • Page 15 PAGE 15 OF 52 MODULE DIAGNOSTICS - 1 OF 1 • 20171103 TEST MODULE Flashing RED Missing/wrong information from fi rmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. DURING MODULE PROGRAMMING Solid GREEN then OFF Module correctly programmed.
  • Page 16 PAGE 16 OF 52 REMOTE STARTER ERROR CODES - 1 OF 1 • 20171103 REMOTE STARTER ERROR CODES: NOTES Engine running. I WARNING: The following applies only when the parking lights are connected and supported by the system. Key in ignition at ON position. Door is open.
  • Page 17 PAGE 17 OF 52 MODULE RESET PROCEDURE - 1 OF 1 • 20171103 >> The following procedure resets the module Module RESET completed. programming to the vehicle. It does not reset any settings confi gured online. Disconnect all connectors from module except Reconnect all connectors.
  • Page 18 PAGE 18 OF 52 BOX CONTENTS - 1 OF 1 • 20171103 BOX CONTENTS 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT MODULE...
  • Page 19 MODULE MOBILE DEVICE 4 PIN BLACK CABLE PORT OBDII CONNECTOR FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: 1-LOG INTO YOUR WEBLINK ACCOUNT.
  • Page 20 PAGE 20 OF 52 COMPATIBLE ACCESSORIES - 2 OF 2 • 20171103 PURSUIT: PRE1BTW RF KIT SOLD SEPARATELY MODULE ANTENNA CARLINK: ASCL6, ASCLBTLR TELEMATIC KIT SOLD SEPARATELY MODULE (NC) U.S. Patent No. 8,856,780 PURSUIT Automotive Data Solutions Inc. © 2017 FLRSBA www.idatalink.com...
  • Page 21 PAGE 21 OF 52 TACH PROGRAMMING PROCEDURE - 1 OF 1 • 20171103 START vehicle for 15 seconds. ON START START START ENGINE START STOP Press and hold the brake pedal. Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.) Wait, LED 2 will fl...
  • Page 22 PAGE 22 OF 52 TYPE 1 - REMOTE PROGRAMMING - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Press once [1x] on LOCK button of aftermarket Remote Programming completed. and PURSUIT RF kits. It programs aftermarket remote.
  • Page 23 PAGE 23 OF 52 TYPE 1 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Valet Mode completed. and PURSUIT RF kits. It triggers the Valet Mode for remote start only. NOTE: In Valet Mode, the Remote starter is not To exit valet mode, repeat steps 2 to 4.
  • Page 24 PAGE 24 OF 52 TYPE 2 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Valet Mode completed. and PURSUIT RF kits. It triggers the Valet Mode for alarm only. NOTE: In Valet Mode, the alarm is disabled To exit valet mode, repeat steps 2 to 3.
  • Page 25 PAGE 25 OF 52 TYPE 3 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Valet Mode completed. and PURSUIT RF kits. It triggers the Valet Mode for remote start and alarm if the alarm override option is set to valet switch (Menu 3, Option 22).
  • Page 26 PAGE 26 OF 52 TYPE 4 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Cycle ignition ON once [1x ON/OFF] rapidly. and PURSUIT RF kits. It triggers the Valet ON START Mode with a custom code override.
  • Page 27 PAGE 27 OF 52 TYPE 5 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for PRESTIGE Press the antenna programming button up and PURSUIT RF kits. It sets a new custom to 9 times, to set the tenths digit from 1 to 9. code override to trigger the Valet Mode.
  • Page 28 PAGE 28 OF 52 ONLINE MODULE SETTINGS - 1 OF 1 • 20171103 WEB PROGRAMMABLE MENUS DESCRIPTION MENU 1 – Remote Starter RS related confi guration options MENU 2 – Doorlock Options Convenience feature confi guration options MENU 3 – Security Options Alarm activation and settings MENU 4 –...
  • Page 29 PAGE 29 OF 52 MODULE DIAGNOSTICS - 1 OF 1 • 20171103 TEST MODULE Flashing RED Missing/wrong information from fi rmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. DURING MODULE PROGRAMMING Solid GREEN then OFF Module correctly programmed.
  • Page 30 PAGE 30 OF 52 REMOTE STARTER ERROR CODES - 1 OF 1 • 20171103 REMOTE STARTER ERROR CODES: NOTES Engine running. I WARNING: The following applies only when the parking lights are connected and supported by the system. Key in ignition at ON position. Door is open.
  • Page 31 PAGE 31 OF 52 MODULE RESET PROCEDURE - 1 OF 1 • 20171103 >> The following procedure resets the module Module RESET completed. programming to the vehicle. It does not reset any settings confi gured online. Disconnect all connectors from module except Reconnect all connectors.
  • Page 32 PAGE 32 OF 52 BOX CONTENTS - 1 OF 1 • 20171103 BOX CONTENTS 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT MODULE...
  • Page 33 MODULE MOBILE DEVICE 4 PIN BLACK CABLE PORT OBDII CONNECTOR FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: 1-LOG INTO YOUR WEBLINK ACCOUNT.
  • Page 34 PAGE 34 OF 52 COMPATIBLE ACCESSORIES - 2 OF 2 • 20171103 CODE ALARM: CA1B, BA1BTW RF KIT SOLD SEPARATELY MODULE ANTENNA CODE ALARM: CA2LED, CA2LCD, CA4B RF KIT SOLD SEPARATELY MODULE ANTENNA CARLINK: ASCL6, ASCLBTLR TELEMATIC KIT SOLD SEPARATELY MODULE (NC) U.S.
  • Page 35 PAGE 35 OF 52 TACH PROGRAMMING PROCEDURE - 1 OF 1 • 20171103 START vehicle for 15 seconds. ON START START START ENGINE START STOP Press and hold the brake pedal. Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.) Wait, LED 2 will fl...
  • Page 36 PAGE 36 OF 52 TYPE 2 - REMOTE PROGRAMMING - 1 OF 1 • 20171103 >> The following procedure is valid for CODE Press once [1x] on LOCK button of aftermarket Remote Programming completed. ALARM RF kits. It programs aftermarket remote.
  • Page 37 PAGE 37 OF 52 TYPE 6 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for CODE Valet Mode completed. ALARM RF kits. It triggers the Valet Mode. NOTE: In Valet Mode, the Remote starter is not To exit valet mode, repeat steps 2 to 3.
  • Page 38 PAGE 38 OF 52 TYPE 7 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for CODE Valet Mode completed. ALARM RF kits. It triggers the Valet Mode with a 3X LOCK confi guration. NOTE: In Valet Mode, the Remote starter is not To exit valet mode, repeat steps 2 to 3.
  • Page 39 PAGE 39 OF 52 ONLINE MODULE SETTINGS - 1 OF 1 • 20171103 WEB PROGRAMMABLE MENUS DESCRIPTION MENU 1 – Remote Starter RS related confi guration options MENU 2 – Doorlock Options Convenience feature confi guration options MENU 3 – Security Options Alarm activation and settings MENU 4 –...
  • Page 40 PAGE 40 OF 52 MODULE DIAGNOSTICS - 1 OF 1 • 20171103 TEST MODULE Flashing RED Missing/wrong information from fi rmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. DURING MODULE PROGRAMMING Solid GREEN then OFF Module correctly programmed.
  • Page 41 PAGE 41 OF 52 REMOTE STARTER ERROR CODES - 1 OF 1 • 20171103 REMOTE STARTER ERROR CODES: NOTES Engine running. I WARNING: The following applies only when the parking lights are connected and supported by the system. Key in ignition at ON position. Door is open.
  • Page 42 PAGE 42 OF 52 MODULE RESET PROCEDURE - 1 OF 1 • 20171103 >> The following procedure resets the module Module RESET completed. programming to the vehicle. It does not reset any settings confi gured online. Disconnect all connectors from module except Reconnect all connectors.
  • Page 43 PAGE 43 OF 52 BOX CONTENTS - 1 OF 1 • 20171103 BOX CONTENTS 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 01 GREEN•BLACK DOT - LOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT 03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT MODULE...
  • Page 44 MODULE MOBILE DEVICE 4 PIN BLACK CABLE PORT OBDII CONNECTOR FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT: 1-LOG INTO YOUR WEBLINK ACCOUNT.
  • Page 45 PAGE 45 OF 52 COMPATIBLE ACCESSORIES - 2 OF 2 • 20171103 DIRECTED: XL202 / FLASHLOGIC: ADSHRNRSXL02 RF KIT SOLD SEPARATELY MODULE ADSHRNRSXL02 XL202 RF DECODER XL202 ANTENNA DIRECTED: SMARTSTART / FLASHLOGIC: ADSHRNSM01 TELEMATIC KIT SOLD SEPARATELY (NC) MODULE ADSHRNSM01...
  • Page 46 PAGE 46 OF 52 TACH PROGRAMMING PROCEDURE - 1 OF 1 • 20171103 START vehicle for 15 seconds. ON START START START ENGINE START STOP Press and hold the brake pedal. Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.) Wait, LED 2 will fl...
  • Page 47 PAGE 47 OF 52 AFTERMARKET REMOTE PROGRAMMING - 1 OF 1 • 20171103 AFTERMARKET REMOTE PROGRAMMING: NOTES I All aftermarket remotes must be programmed to the RF-Kit. Refer to the RF-Kit user guide for aftermarket remote features and programming procedures. U.S.
  • Page 48 PAGE 48 OF 52 TYPE 8 - VALET MODE - 1 OF 1 • 20171103 >> The following procedure is valid for DIRECTED Set ignition to OFF position. RF kits. It triggers the Valet Mode. ON START ENGINE START STOP NOTE: In Valet Mode, the Remote starter is not Valet Mode completed.
  • Page 49 PAGE 49 OF 52 ONLINE MODULE SETTINGS - 1 OF 1 • 20171103 WEB PROGRAMMABLE MENUS DESCRIPTION MENU 1 – Remote Starter RS related confi guration options MENU 2 – Doorlock Options Convenience feature confi guration options MENU 3 – Security Options Alarm activation and settings MENU 4 –...
  • Page 50 PAGE 50 OF 52 MODULE DIAGNOSTICS - 1 OF 1 • 20171103 TEST MODULE Flashing RED Missing/wrong information from fi rmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. DURING MODULE PROGRAMMING Solid GREEN then OFF Module correctly programmed.
  • Page 51 PAGE 51 OF 52 REMOTE STARTER ERROR CODES - 1 OF 1 • 20171103 REMOTE STARTER ERROR CODES: NOTES Engine running. I WARNING: The following applies only when the parking lights are connected and supported by the system. Key in ignition at ON position. Door is open.
  • Page 52 PAGE 52 OF 52 MODULE RESET PROCEDURE - 1 OF 1 • 20171103 >> The following procedure resets the module Module RESET completed. programming to the vehicle. It does not reset any settings confi gured online. Disconnect all connectors from module except Reconnect all connectors.

This manual is also suitable for:

Flrsba pursuitFlrsba code alarmFlrsba directed

Table of Contents

Save PDF