Advertisement
AC adaptor
Plug one end of the AC adaptor into the
DC 6V socket, then plug the other end
into an AC outlet.
- Use only the supplied AC adaptor.
- If the AC adaptor
is connected,
the
power supply automatically
switches
to the AC power
source
and the
installed batteries are disconnected.
Rechargeable
battery
I. Install
the
rechargeable
nickel-
cadmium
battery (SANYO NBP-30B)
as shown
below.
Observe
proper
polarity.
2. Connect the AC adaptor. The battery
is fully charged approximately 10 hours
after the AC adaptor is connected.
- Do not charge
continuously
for 24
hours or more.
CONTAIN NICKEL-CADMIUM
BAl_fERY.
MUST BE RECYCLED OR DISPOSED OF
PROPERLY.
Alkaline
batteries
Install two "W"
batteries (not supplied)
as shown below. Observe proper polarity.
Battery
recharging
or replacement
If the rechargeable
battery
or alkaline
batteries
are weak
and discharged,
"~"
blinks on the display,
then the
power
automatically
turns off. If this
occurs, recharge the rechargeable battery
or replace the alkaline batteries.
- Dispose of all used batteries safely and
in accordance with all applicable laws.
Note:
When you are not going to use the unit
for one month or more, take the batteries
out of the battery compartment.
4
Advertisement
