Assembling The Clutch - Malaguti Centro 125 Workshop Manual

Assembling the clutch

Before assembling, degrease sliding surface of fixed
secondary pulley, outer part of clutch and inner part of pulleys
assy.
Degrease and clean surface of mobile secondary pulley (A) in area of
drive belt contact.
Grease lip and fit oil seal (B) with lip on side of internal surface of mobile
secondary pulley.
Grease O-Rings (C) and insert in mobile secondary pulley (A).
Pack lithium grease into 34 mm diameter hole of mobile secondary
pulley.
Also apply adequate amount of lithium grease to fixed secondary pulley
roller bearing and ball bearing.
125 - 160 cc
WORKSHOP MANUAL
SPEED VARIATOR-CLUTCH UNIT
B
A
A
C
C
07028180
07028181
83