Remove gasket (C) and locating dowels (D).
Remove oil seals (E) from engine casings.
Do not prise with a screwdriver etc. in area of contact
between casings if it proves difficult to remove flywheel
side casing. Tap lightly with a plastic mallet and keep
clutch side engine casing raised.
Crankshaft checks
Measure end play of connecting rod big end (A).
Service limit: 0.5 mm
125 - 160 cc
WORKSHOP MANUAL
ENGINE CASING, CRANKSHAFT
C
07028213
07028214
C
D
E
A
115