Auto Bass Chord; Effect Control; Recording And Rhythm Programming - Max KB1 Owner's Manual

◆
Press [start/stop] to start accomp rhythm.
◆
Under the enable state, Press [Sync], "SYN" will show on the screen. The play any key in
the chord key zone (the 1st-19th key, from left), the accomp rhythm will be activated.
2. Interlude
After the accomp rhythm is activated, press [Fill-in] to have a temporary rhythm play during the
accomp rhythm.
3. Stop rhythm
◆
During the accomp rhythm, press [Start/Stop] the stop the accomp rhythm.
●
Tempo adjustment
It tempo is defaulted to be 120 tempo/min, press [Tempo +] or [Tempo -] to increase or decrease
the tempo speed. Press the two buttons simultaneously may reset to the default value of 120
tempo/min.
V. Auto Bass Chord
●
Single chord
Single chord
Single Chord Fingering
Fingered Chord Fingering (C Key)
(The C key fingered chord fingering is as shown in the following
figure, and the rest can be obtained by analogy)
Under the state that the rhythm is activated, press [Single Chord]. After the "SIN" is showed on
the screen, you can play a single chord on the keys in the chord zone of the keyboard.
Press [Single] again, "SIN" will disappear from the screen, and the single chord function will be
disenabled.
●
Fingered chord
Under the state that the rhythm is activated, press [Fingered]. After the "FIN" is showed on the
screen, you can play a figured chord on the keys in the chord zone of the keyboard.
Press [Fingered Chord] again, "FIN" will disappear from the screen, and the fingered chord
function will be disenabled.
VI. Effect Control
●
Sustain function
Press [Sustain], "SUS" will show on the screen, and the sustain effect will be activated. Press
this button again, "SUS" will disappear from the screen, and the sustain effect will be
disenabled.
●
Vibrato function
Press the [Vibrato] button, "VIB" will show on the screen, and the sustain effect will be
activated. Press this button again, "VIB" will disappear from the screen, and the sustain effect
will be disenabled.
VII. Recording and Rhythm Programming
●
Recording
Press [Record] to enable the recording function, "REC" will show on the screen. Under this
mode all playing notes will be recorded. When the storage is full, "REC" will flash on the screen,
and recording will stop automatically.
◆
Press [Play] to playback the recorded notes, and "PLAY" will show on the screen. On
completion of playback, "REC" will show on the screen. You can record a new rhythm, or you
can press [Play] to playback the recorded rhythm.