Performance Preparation; Basic Performance Method; Auto Rhythm - Max KB1 Owner's Manual

II. Performance Preparation
● Battery mounting
6 AA batteries can be used as the power supply for
this keyboard. Open the cover of the battery jar at
the bottom of the keyboard, check whether the
positive and negative electrodes of the battery
conforms to the indications, mount the batteries one
by one, and then cover the battery jar.
※Low voltage due to long time use will cause low
volume or timbre distortion. In this case, replace the
battery immediately so as not to impact the
performance effect. If the keyboard will be left idle
for a long time, please remove the batteries, so as to
protect the keyboard components from damage due
to battery damp.
●
AC/DC Power adaptor
A dedicated AC/DC power adapter shall be used. Connect the output end of the adaptor to the
power port on the rear panel of the keyboard, and then the other end to the power socket.
※
(Note: the input voltage to the adaptor shall be compatible with the power supply voltage)
●
Audio Output / External Headphone
◆Audio output: firstly, power off the keyboard and the external audio devices, secondly,
connect one end of the audio cable to the PHONES/OUTPUT port on the rear panel of the
keyboard, and then connect the other end to the audio input port of the audio devices.
◆
Headphone connection: When connecting a headphone to the PHONES/OUTPUT port on
the rear panel of the keyboard, the loudspeaker will be disenabled automatically. In this way,
you can perform without disturbing others.
◆
Caution! When using headphone, maintain at an appropriate to protect your hearing.
●
Mic Input and Audio Input
◆
Mic input: connect a microphone to the MIC port to sing while playing the keyboard.
◆
The Keyboard is equipped with a stereo input function. Sound signals from mobile phone,
MP3 player, computer and other audio devices can be input into the keyboard system for
playing. Firstly turn off the Keyboard, then, connect one end of audio cable to the output port of
an audio device, and the other end to the AUDIO INPUT port on the rear panel of the Keyboard,
finally, power on the keyboard.
III. Basic Performance Method
When [Power ON/OFF] is pressed, LED screen will turn on and show the current tone, tempo
and other status. Then you may operate the Keyboard as required.
●
Master volume adjustment
Press [Master Vol +] or [Master Vol -] to turn up or turn down the master volume. Press [Master
Vol +] and [Master Vol –] simultaneously to reset to the default value of "10".
By controlling the master volume the accomp volume can be controlled.
●
Accomp volume adjustment
Press [Accomp Vol +] or [Accomp Vol -] to turn up or turn down the accomp volume. Press the
[Accomp Vol +] and [Accomp Vol -] simultaneously to reset to the default value of"10".
●
Tone selection
The Keyboard provides 255 tones, from "000" to "254", for your selection. When the keyboard is
powered on, the Tone Selection function will be enabled automatically, and "TONE" will show
on the screen. In the absence of screen, press [Timbre] to enable the tone selection function.
The Tone is defaulted to be "000", and it can be adjusted by pressing the corresponding number
buttons or pressing the "+" /"-"button.
●
Playing Percussion
This Keyboard provides 8 kinds of panel percussions. Press "Percussion" to ply the
corresponding precision. Percussion instruments can be added to enhance the atmosphere as
required.
This Keyboard provides 61 kinds of keyboard percussions. Press [Percussion] to turn the
keyboard into percussion keyboard, and each key corresponds to one percussion instrument.
Press this button again to disenable the keyboard percussion function.
●
Playing demonstration songs
This Keyboard has stored 24 demo songs, from "000" to "023", for your selection. Press [Demo
Song], "SONG" will show on the screen, and demonstration songs will play in order. During
playing process, press [Demo Song] to play the next demonstration song, and press
[Start/Strop] to stop playing.
During the playing process, you can press the number buttons or the "+"/"-" buttons to select
other demonstration song, and the selected demonstration song will play repeatedly.
IV. Auto Rhythm
●
Rhythm selection
This Keyboard provides 255 rhythms, from "000" to "254", for your selection, and the rhythm is
defaulted to be "000". Press [Rhythm], "RHYM" will show on the screen. Then press the number
buttons or the "+"/"-" buttons to select other rhythms.
●
Rhythm control
1. Rhythm enabling