Connecting Using Bluetooth 4.0 Le; Windows & Macos; Ios; Android - Prolon PL-485-BT User Manual

DRAFT USER MANUAL

CONNECTING USING BLUETOOTH 4.0 LE

Pairing
Range: 100 m (330 ft)
Windows & MacOS
TBD

iOS

TBD

Android

TBD

CONNECTING OVER USB

Windows

The PL-485-BT requires certain drivers to be installed on the computer for it to function. The drivers are installed
on the computer at the same time that the Focus Software is installed. If your computer still cannot locate the
drivers, please direct it to manually search in the ProLon installation folder, in the 'Drivers' subfolder.

MacOS

The PL-485-BT requires drivers certain drivers to be installed on the computer for it to function. The drivers are
present in the installation package.

iOS and Android

The iOS and Android versions cannot connect to the converter over USB and are restricted to the Bluetooth 4.0 LE
mode only.

CONNECTING THE RS485 SIDE

Connect the A (+) and B(-) screw terminals to the wires of appropriate polarity on the RS485 bus, using appropriate
RS485 cabling. Connect the GND screw terminal to RS485 GND reference as needed.
6