Explanation Of The Sms From B-Phone; Leds Signals - B-phone User Manual

CAL2 - second call number (1..20 symbols).
SP - a pause when turning on the device or setting event alarm
before the device start detecting the event to notify the
defined phone number(s); 1..99 seconds.
..
PR - the level of movement sensor; 0-off, 1..9-on.
SD - the level of sound sensor; 0-off, 1..9-on.
SL - level of speaker; 0-off, 1..9-on.
MS - sensitivity of microphone
0-off, 1..9-on.
SM - reminder SMS function; 0 - off, 1 - on.
RSSI - condition of mobile operator coverage; 0..9.
LS - warning about low mobile communication operator cover-
age; 0-off, 1-on.
Example:
Sending SMS command to B-phone:
„B-PHONE CAL1=xxxxxxxx CAL2=xxxxxxxx SP=30 PR=6 SD=3"
or
"B-PHONE CAL1=XXXXXXX CAL2=XXXXXXX SP=90 SM=1 LS=1
PR=7 SD=8 SL=8 MS=4"
Receiving SMS from B-phone to mobile phone:
„SOS=Movement BAT=63 RSSI=5 B-PHONE CAL1=xxxxxxxx
SP=30 PR=6 SD=3 LS=0 SL=8 MS=12"
or
„SOS=Movement BAT=63 RSSI=5 B-PHONE CAL1=xxxxxxxx
CAL2=xxxxxxxx SP=30 PR=6 SD=3 LS=0 SL=8 MS=12"

EXPLANATION OF THE SMS FROM B-phone

For your safety software of third parties cannot access the SMS
received on your phone. Due to limited length of SMS informa-
tion from the device is received in abbreviated form. Below
14
during sound transmission;
there is explanation of the received abbreviations:
SOS - source of the event,
Movement – reaction of the movement sensor,
Crying – reaction of the sound detector,
Low Signal – low coverage of mobile communication network or,
Low battery – low charge of battery,
Empty battery BAT=1 - device turns off.

LEDs SIGNALS

The device has two LEDs: blue and red.
1. The blue one is active (on) in the following ways:
1.1. Is on for 0.2 sec at 0.4 sec interval during turning on
and off;
1.2. Is on continuously when the device is ready for work,
but the monitoring mode has not been activated;
1.3. Is on for 0.1 sec with 4 sec interval, when the monitoring
mode is activated.
2. The red one is active (flashes), when an event is recorded,
i.e. sound or movement. Additionally the red LED with number
of impulses informs about unexpected turning off of the device
in the following situations:
2.1. Battery voltage below minimum – flashes two times and
the device turns off;
2.2. Wrong PIN code of SIM card or no SIM card inserted –
flashes three times every 10 seconds;
2.3. The call limit of the card is over – flashes four times
every 10 seconds;
2.4. Other reason – flashes 5 times every 10 seconds.
15