Advertisement
7. Verify the configurations and click Next if they are correct.
After basic network configurations, configure routes to ensure the connectivity between the SVN and the intranet
and Internet.
Use the virtual gateway to configure SSL VPN services (in one-armed mode in this example).
1. Choose Wizard > Virtual Gateway Configuraion Wizard. In Gateway Configuration, set the parameters and click Next.
2. Select necessary services. After a service is enabled, the configuration page of the service will appear in the wizard.
3. (Optional) In Web Proxy, create Web proxy resources and click Next.
4. (Optional) In Network Extension, set the client IP address allocation method to IP Address Pool Mode, create an
IP address pool, and click Next. In this example, the client IP address and the internal server address are on different
subnets. Therefore, you must configure routes on the SVN and router to reach the internal server and client.
5. (Optional) In File Sharing, enable file sharing, create file sharing resources, and click Next.
6. (Optional) In Port Forwarding, enable Port Forwarding, Automatic Enabling, and Preserve Connections, create port
forwarding resources, and click Next.
7. In User List, create a local user to access the virtual gateway resources and click Next.
3
Advertisement
