1. Manuals
  2. Brands
  3. ADC Manuals
  4. Amplifier
  5. 11896-B
  6. User manual

ADC 11896-B User Manual

16x1 unity-gain combiner-amplifier
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Content
INTRODUCTION .......................................................................... 1
Revision History ..................................................................... 2
Trademark Information ................................................................ 2
Admonishments ..................................................................... 2
General Safety Precaution .............................................................. 2
1
GENERAL.......................................................................... 3
2
PRODUCT DESCRIPTION ............................................................... 4
2.1
2.2
2.3
3
INSTALLATION ...................................................................... 6
3.1
4
OPERATING INSTRUCTIONS ............................................................. 8
5
CUSTOMER INFORMATION AND ASSISTANCE ................................................. 8

INTRODUCTION

This manual covers the ADC 16 × 1 Unity-Gain Combiner-Amplifier Panel (UGC Panel),
which is used to combine 16 sub-split signals into a single output signal.
1038531 Rev A
16 × × × × 1 Unity-Gain Combiner-Amplifier
2 0 I
1 6 1
16 × × × × 1 Unity-Gain Combiner-Amplifier
Functional Description ........................................................... 4
Physical Description ............................................................ 4
Technical Description............................................................ 5
I A I C
I
2 0 0
P
ADCP-61-803 • Issue 3 • September 2000

User Manual

11896-B
 2000, ADC Telecommunications, Inc.
Page
Page 1

Advertisement

Table of Contents
loading

Related Manuals for ADC 11896-B

Summary of Contents for ADC 11896-B

  • Page 1: Table Of Contents

    OPERATING INSTRUCTIONS ............. 8 CUSTOMER INFORMATION AND ASSISTANCE ..........8 INTRODUCTION This manual covers the ADC 16 × 1 Unity-Gain Combiner-Amplifier Panel (UGC Panel), which is used to combine 16 sub-split signals into a single output signal. 1038531 Rev A Page 1 ...

  • Page 2: Revision History

    09/2000 Added BNC-type connectors, information for 220/240 VAC operation, and updated specifications. Trademark Information ADC and ADC Telecommunications are registered trademarks of ADC Telecommunications, Inc. Admonishments Important safety admonishments are used throughout this manual to warn of possible hazards to persons or equipment. An admonishment identifies a possible hazard and then explains what may happen if the hazard is not avoided.

  • Page 3: General

    ADCP-61-803 • Issue 3 • September 2000 1 GENERAL The ADC 16 × 1 Unity-Gain Combiner-Amplifier Panel (UGC Panel) is designed for use in 19-inch or 23-inch equipment racks (the mounting ears are reversible). Its function is to combine 16 sub-split signals into a single output signal. This panel is powered from facility 100 to 260 VAC 50/60 Hz through a standard modular power cord and uses active circuits to achieve 0 dB of insertion loss.

  • Page 4: Product Description

    MONITOR is mounted on the front panel for signal monitoring purposes. The UGC’s power input is located on the rear panel, as is the power switch. A green POWER LED on the front panel indicates the status of the power supply. Page 4  2000, ADC Telecommunications, Inc.

  • Page 5: Technical Description

    Storage –40°C to +70°C (–40°F to 158°F) Humidity Operating 10 to 90% No Condensation Storage 5 to 95% No Condensation *Specified noise figure assumes a 16 dB noise figure for the combiner network. Page 5  2000, ADC Telecommunications, Inc.

  • Page 6: Installation

    Warning: The Unity Gain Combiner is factory set for 120 VAC operation. For 240 VAC operation, refer to subsection 3.1, Configuring the Unity Gain Combiner for 220 to 240 VAC Operation. 5. Ensure that the Power LED is lit (GREEN), indicating that the unit is receiving power. Page 6  2000, ADC Telecommunications, Inc.

  • Page 7: Configuring The Unity Gain Combiner For 220 To 240 Vac Operation

    7. Connect the correct type of power cord corresponding to the local electrical code. 8. Ensure that the Power LED is lit (GREEN), indicating that the unit is receiving power. 100/120/240 VAC 15594-A FUSE WINDOW MODULE Figure 4. Power Inlet Module Page 7  2000, ADC Telecommunications, Inc.

  • Page 8: Operating Instructions

    Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits and ADC further disclaims any and all liability for indirect, incidental, special, consequential or other similar damages.

Table of Contents