Setting Up A Data Connection; With Your Computer - Motorola VE20 User Manual

Setting Up a Data Connection

With Your Computer

In order to use your phone as a modem, you'll first
need to load the Sprint PCS Connection ManagerSM
software on your computer. Then, use a compatible
USB cable or built-in Bluetooth connection to connect
your phone to your computer.
1.
From your computer's traditional Internet
connection, go to www.sprint.com/downloads
download the
Sprint PCS Connection Manager for
Phone as Modem/USB Cables
and drivers can be downloaded free of charge.)
2.
Double-click the downloaded file and follow the
onscreen instructions to install the Sprint PCS
Connection Manager software and drivers to your
computer.
3.
Once the software has been fully installed, connect
your phone to your computer using a USB cable
or built-in Bluetooth connection. (Your computer
will detect the connection and a status icon may
appear in your system tray.)
and
software. (The software
4.
Launch the Sprint PCS Connection Manager
software, select a profile, and click Connect.
5.
Once the connection is established, launch an
Internet session, check your email, or do anything
else you would do using a traditional data
connection.
6.
When you're ready to terminate the data
connection, double-click the Sprint PCS
Connection Manager icon in the system tray, and
then click to end the session.
Disconnect
Note While your data connection is active, you will not be
able to receive incoming calls; all incoming calls will
be forwarded to your Sprint Voicemail. Placing an
outgoing call during a data session terminates the
data connection.
Sprint Vision services are available on the Sprint
National Network. Sprint Power Vision services work
anywhere on the Sprint National Network, but
broadband-like download speeds are only available
in areas covered by the Sprint Mobile Broadband
Network.
Section 3B. Sprint Power Vision 141