Guidance For Quick Operations; Prior To Use; Basic Operations; Cordless Phone - Newcont NTP-3422 Operating Instructions Manual

GUIDANCE FOR QUICK OPERATIONS

PRIOR TO USE

1) Connect the PHONE LINE CORD to the "TEL LINE" jack on the bottom of BASE
UNIT and to a telephone outlet.
2) Connect the AC Power Adaptor to the 12V DC jack on the bottom of BASE UNIT
and to the wall power outlet.
3) Plug the RADIO ANTENNA to the terminal on the bottom of BASE UNIT.
Note:Be sure to insert the RADIO ANTENA to ensure better reception of AM
radio signal.
4) Install the battery pack into the battery compartment of HANDSET and be
sure to charge the battery Pack for 12 hours before the initial use, otherwise the
lasting time will be reduced and the battery life will be shortened.
Note: Properly-charged battery pack can last 5 days in STANFBY Mode,
and about 4 hours of continuous use.

BASIC OPERATIONS

CORDLESS PHONE

Making a Phone Call:
Ø Pick up HANDSET and press
Is heard.
Ø OR: Pick up HANDSET and dial the phone number, then press
Ø OR: Press
on HANDSET and dial the phone number when the dial tone
SPK
is heard.
Note: [ SPK ] will be displayed on the screen of BASE UNIT in SPEAKER mode.
Terminating a Phone Call:
Ø Place HANDSET back to the charger.
Ø OR: Press on HANDSET to hang up.
Answering a Call:
Ø Pick up HANDSET and press
Ø OR: Press [ SPK ] and connect the call on SPEAKERPHONE mode.
Redialing:
Press or [ SPK ] and then press [ redial ] to dial the last-dialed call.
Adjusting the Phone Volume:
Press or on HANDSET to adjust the phone volume..
Switching Between HANDSET & SPEAKERPHONE:
Press [ SPK ] during the call in use to switch between HANDSET and
SPEAKERPHONE.
Mute:
Press [ mute ] on HANDSET to activate mute and press again to cancel.
Note: When [ mut e ] is activate, the callee cannot hear you.
, dial the phone number when the dial tone
.
6
GUIDANCE FOR ADVANCED OPERATIONS
Ø Press 'MUTE' again to exit from REMOTE CONTROL mode.
Note: The voice instructions include:
For help menu, press 7;
To turn answer Off/On, press 4
To playback, press 2;
To stop, press 2 again;
During playback;
To skip to next, press 3;
To skip to the previous, press 1;
To delete, press zero
CD PLAYER & RADIO
SLEEP TIMER FOR CD PALAYER OR RADIO:
Press [ SLEEP ] during CD or RADIO playing to set up timer, and CD PLAYER
or RADIO will automatically be turned off at the previously-set time.Options of
30 / 60 / 90 /120 minutes and OFF can be chosen from, with the corresponding
Icon displayed on the screen.
30 60
Ø
Press [ SLEEP ] to display the remaining time.
Ø
Press [ SLEEP ] to adjust the timer when the remaining time is still displayed
on the screen.
Note: The corresponding Icon [ SLEEP ] will displayed on the screen after
selection.Can not set the sleep time during the CD player as Alarm.
REPEATING CD PLAY:
Press [ REP ] to switch REPEAT modes when CD is playing with the
corresponding Icons displayed on the screen. There are three REPEAT modes:
repeat all songs
repeat the current song
1
Shuffle mode randomly rearranges the track order. If you want to play
SHUF
the tracks in a random order, select Shuffle mode, that means if you didn't
select the Shuffle mode ,you will play your tracks in a particular order.
ALARM & SNOOZE
CANCELLING ALARM:
Ø Press [ SET ] to cancel the alarm. Refer to the 'SETTING ALARM' (P 14)
for details.
Ø OR: Press [ ALM1] /[ ALM2 ] to quickly cancel the alarm. Refer to the
' QUICK SETTING ALARM MODE & DURATION' (P 15) for details.
Note:
u
NO ALARM Icon, such as <CD>, <RADIO> or <BUZZER> displays on the
screen once cancelled.
u NO ALARM available once cancelled until ALARM to be re-set.
90 120 OFF
19