Alarm Clock; Other Important Features; Auto Mute - Newcont NTP-3422 Operating Instructions Manual

Table of Contents

Advertisement

GUIDANCE FOR QUICK OPERATIONS
Deleting the Voice Message:
Ø Press [ DEL ] to delete the current message during the message playing.
Ø Press and hold [ DEL ] to delete all the old messages during the message
playing.

ALARM CLOCK

There are two alarms as [ ALM1 ] and [ ALM2 ].
Ø Press [ SET ] and the text 'SET TIME?' will be displayed on the screen, scroll
[ VOL
] / [VOL
] to 'ET ALARM1?'.
Ø Press [ SET ] again to display 'SET AL1 HOUR', scroll [ VOL
select.
Ø Press [ SET ] to confirm, and set the 'MINUTE' in the same way. And the
'SET AL1 MODE' appears on the screen,And scroll [ VOL
select the alarm mode in the following order.
OFF
CD
Note: mode Once on OFF mode,no CD, or RADIO, or BUZZER icon displayed
on the screen;
Ø Press [ SET ] to confirm the mode, then 'SET AL1 VOLUME' appears on the
screen.And scroll [ VOL
] / [VOL
Note: The volume of the alarm increases gradually when it rings. The setting
is for the maximum volume (no less than 5).
Ø Press [ SET ] to confirm the Volume, then 'SET AL1-DURATION' display on
the screen.And scroll [ VOL
Note: Minimum duration is 10MIN,maximum duration is 120MIN for CD
/RADIO and 30MIN for BUZZER.
Ø Press [ SET ] to confirm and quit.
Note: Directly press [ ALM1 ] to view the time and duration of ALM1, once
'ALARM1 XXMIN' and corresponding Icon appear on the screen , here
" XXMIN"means the duration of the ALARM. Follow the same instructions
for ALARM 2.

OTHER IMPORTANT FEATURES

Auto Mute:

RADIO or CD PLAYER will automatically become mute under one of the
following circumstances and the Icon <MUTE> will flash on the screen
Ø When the phone is ringing
Ø OR: When the phone is in use.
Ø OR: When HANDSET is under REMOTE CONTROL mode.
Auto Mute will be automatically cancelled
Ø When the phone call is finished or the ring stops;
Ø OR: Press [ SNOOZE/MUTE ] on BASE UNIT;.
] / [VOL
] / [VOL
RADIO
BUZZER .
] to adjust the volume.
] / [VOL
] to select the duration.
8
HANDSET/PHONE BOOK
SAVING NUMBERS TO PHONE BOOK:
PHONE BOOK can save up to 64 numbers, frequently used for easy and quick
access.
Saving a New Number to PHONE BOOK:
Ø Press
Ø Scroll to 'NEW ENTRY' and press
Ø Enter the name (maximum 11 characters). Press
entered characters before the cursor.
Note: Please refer to NAMING HANDSET (P.10) about how to entering character.
] to
Ø Press
Ø Enter the phone number (maximum 24 characters). Press
the wrongly entered numbers before the cursor.
] to
Ø Press
Ø Scroll
Save the Recently Dialed Number to PHONE BOOK:
Ø Press [ redial ] to show the recently dialed numbers on the screen.
Ø Press
Ø Enter the name (maximum 11 characters). Press
wrongly entered characters before the cursor.
Note: Please refer to NAMING HANSET (P. 10) about how to entering character.
Ø Scroll
to 'PHONE BOOK', where the phone number is displayed and edited
if necessary.
Ø Press
Saving INCOMING CALL Numbers To PHONE BOOK:
Ø Press
Ø Scroll
Ø Press FORMAT
10-digit or 11-digit .
Ø Press
Note: Please refer to NAMING HANSET (P. 10) about how to entering character.
Ø Scroll
edited if necessary.
Ø Press
DIALING FROM PHONE BOOK:
Ø Press
Ø Scroll
Ø Press
EDITING PHONE BOOK:
Ø Press
Ø Scroll
Ø Press
GUIDANCE FOR ADVANCED OPERATIONS
to access PHONE BOOK under STANDBY mode.
.
OK
to confirm.
to save.
to 'PHONE BOOK'
.
to save.
to show INCOMING CALL LIST.
to the number to be saved.
#
to select the desired redial format 7-digit
to display and edit the caller's name shown on the screen.
to 'PHONEBOOK', where the phone number is displayed and
to save.
to access PHONE BOOK under STANDBY mode.
to the number to be dialed.
or [ SPK ] to dial.
to access PHONE BOOK under STANDBY mode
to the number to be edited and press
to go to 'EDIT' and press
.
OK
17
to delete the wrongly
to delete
for deleting the
to confirm.
OK

Advertisement

Table of Contents
loading

Related Products for Newcont NTP-3422

Table of Contents