Advertisement
X l t k T o o l - 8 2 0 5
I
' ort
Baud Rate
Window
9) The update process is successful as the progress bar is 100%. After the update process is ok,
turn off power and wait indicator light is off. Turn on power and TV can work.
Checking :
It is needed to check the version o f the firmware for M T 5351A G which has been
download into the Plasma T V .
Press Menu button of the remote control and the main O SD menu is appeared on
the screen .
Use the remote control and select the mode of the adjustment .
Use the remote control and select the mode of D T V
Entry the mode of D T V
Input "0000" (zero , zero , zero , zero) o f the remote control while the Plsama T V is
under the above condition . Then enter the mode of factory after input the digits .
It is easy to be found the version o f the current firmware for M T 5351A G is
"XXXX_PDP4210EA_ATSC_IT_000000XX_X_P"under the mode o f factory .
[ F l a s h U pgrade]
■■■Bonn
C
C
C
_
X
&
F
M
Advertisement
