Troubleshooting; Technical Data; Environmental Protection - Designair CHAND Installation And User Manual

Table of Contents

Advertisement

8. TROUBLESHOOTING

Fault
Cause
The appliance is not
hung properly on the
brackets.
Excessive
The fan blade is
vibration.
damaged.
The fan motor is not
fixed tightly.
The fan blade is
jammed.
Light on, but fan
does not work.
The motor is
damaged.
Light bulb broken.
Both light and
fan do not work. Power connection
loose.
Distance between
the appliance and
Suction
the cooking place too
performance
large.
not good.
Metallic anti-grease
filter is dirty.
Solution
Take down the
appliance and check it
is properly fixed.
Switch off the
appliance. Repair to be
carried out by qualified
service personnel only.
Replace with a bulb
with correct rating.
Check power supply.
Readjust the distance
to:
Gas cookers: 65cm
Electric cookers: 40cm
Coal/oil cookers: 80cm
Clean filters (see
Maintenance chapter).

9. TECHNICAL DATA

Power supply : 220-240V~ 50Hz
Power consumption – Fan
Power consumption – Luminary : 3 x
35W Max
Power consumption – Total : 305W
Protection class :
Light bulb
: Max. 35W (GU-10)
10. ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
: 200W
II

Advertisement

Table of Contents
loading

Table of Contents