Water Dispenser - Beko MN1416224PX User Manual

Important instructions regarding safety and environment
Do not step or lean on the door,
•
drawers and similar parts of
the refrigerator. This will cause
the product to fall down and
cause damage to the parts.
Take care not to trap the power
•
cable.
1.1.1 HC warning
If the product comprises a cooling
system using R600a gas, take
care to avoid damaging the
cooling system and its pipe while
using and moving the product.
This gas is flammable. If the
cooling system is damaged, keep
the product away from sources
of fire and ventilate the room
immediately.
The label on the inner
C
left side indicates the
type of gas used in the
product.
1.1.2 For models with

water dispenser

Pressure for cold water inlet
•
shall be maximum 90 psi (6.2
bar). If your water pressure
exceeds 80 psi (5.5 bar), use a
pressure limiting valve in your
mains system. If you do not
know how to check your water
pressure, ask for the help of a
professional plumber.
If there is a risk of water
•
hammer effect in your
installation. Consult a plumber.
Do not install on the hot water
•
inlet. Take precautions against
of the risk of freezing of the
hoses. Water temperature
operating interval shall be 33°F
(0.6°C) minimum and 100°F
(38°C) maximum.
Use drinking water only.
•
1.2. Intended use
This product is designed for
•
home use. It is not intended for
commercial use.
The product should be used to
•
store food and beverages only.
Do not keep sensitive
•
products requiring controlled
temperatures (vaccines,
heat sensitive medication,
medical supplies, etc.) in the
refrigerator.
The manufacturer assumes no
•
responsibility for any damage
due to misuse or mishandling.
1.3. Child safety
• Keep packaging materials out of children's
reach.
5 / 32 EN
Refrigerator / User Manual