Advertisement
Using Your Headset & AG Dongle
Pairing Your Headset & AG Dongle (PrimeNet)
Note : You must pair your headset and AG Dongle before you make a call.
You establish a Bluetooth
Link, the AG Dongle remembers the headset's ID. Once your headset and ag dongle are paired, your headset
automatically connects to ag dongle any time, you turn your headset on.
Paired Link
With the headset and ag dongle in close proximity :
STEP :
Headset
1.
Turn headset On.
2.
Rotate the button toward
AG Dongle
3. Turn AG Dongle OFF (serious)
4. Press the button on the phone to bond to the
headset.(keep press button about 10 seconds)
"red-blue led on same time for 3 seconds,
off, red-blue led on same time again è
release button."
link between your headset and AG Dongle with a paired link. When you set up a paired
TM
1
for 5 seconds.
When pairing mode is process, the red headset Indicator
flash for 3 seconds. And then the blue headset indicator
flash for 1 seconds. Finally, the blue and red headset
Indicator flash continually.
RESULT :
1.
Both of the headset indicator are turned off.
2.
The red headset indicator flash twice. And then
the blue headset indicator flash for 3 seconds
and off continually.
Both of the ag dongle indicator are turned off
•
The red-blue ag dongle indicator flash twice. And
•
the blue headset indicator will start lighting
every 3 seconds, indicating that the headset is
standby mode.
14
Advertisement
