Advertisement
Using Your Headset
Pairing Your Headset & Phone
Note : You must pair your headset and phone before you can make a call.
You establish a Bluetooth
link, the phone remembers the headset's ID. Once your headset and phone are paired, your headset automatically
connects to your phone any time, you turn your headset on.
Paired Link
With the headset and phone in close proximity :
STEP :
1.
Turn headset OFF.
2.
Rotate the button toward
3.
Perform a device discovery from the phone.
* For details on device discovery for your phone,
refer to the user's guide for the phone.
4.
Press the Yes key on the phone to bond to the
headset.
5.
When "Enter Bluetooth Passkey" appears,
enter the passkey 0000, then press OK on the
phone to pair the headset with the phone.
link between your headset and phone with a paired link. When you set up a paired
TM
2
for 7 seconds.
When pairing mode is process, the red headset Indicator
flash for 3 seconds. And then the blue headset indicator
flash for 1 seconds. Finally, the blue and red headset
Indicator flash continually.
RESULT :
1.
Both of the headset indicator are turned off.
2.
When pairing mode is process, the red headset Indicator
flash for 3 seconds. And then the blue headset indicator
flash for 1 seconds. Finally, the blue and red headset
Indicator flash continually.
3.
HANDSET
4.5. The red headset indicator flash twice. And the
the blue headset indicator will start lighting
every 3 seconds, indicating that the headset is
standby mode.
13
Advertisement
