Table of Contents
Advertisement
5
OUTPUT SDI
CONVERTER MODULE
(Main input)
6
INPUT SDI CONVERTER
MODULE
(output)
7
INPUT SDI CONVERTER
MODULE
(Backup input)
8
INPUT SDI CONVERTER
MODULE
(Main input)
9
DIGITAL OUTPUT
10
DIGITAL INPUT
11
ANALOGUE AUDIO
OUTPUT
12
ANALOGUE AUDIO
INPUT
13
ETHERNET PORT
14
SERIAL PORT 3
15
GPI RELAY
Axel Technology srl
www.axeltechnology.com
Main or Primary
(main) input of the Internal Re-Embedding module of the
Falcon Three TV SDI Audio Processor. This is the main input ONLY for the SDI
TV video signal. Generally speaking, it is the main input of the Video Re-
Embedding module with the audio just processed by the Falcon Three TV SDI.
By default it is connected with a Jumper BNC-BNC cable to point 6 as this
module Re-Embeds the SDI Video signal with the Audio from the audio
processor. The audio signal is taken from the De-Embedding module; this is
explained in detail in the points below.
This BNC is used to take the SDI Digital Television signal without Embedded Audio, as the
"Input SDI Converter" Module receives the SDI Digital television signal and De-Embeds it
(i.e. separates the SDI TV signal and only takes the audio) and sends the De-Embedded
audio signal to the Falcon Three TV SDI audio processor. By default, it is connected with a
Jumper BNC-BNC cable to point 5 as this module De-Embeds the SDI Video signal with
the Audio from the audio processor. The audio signal is taken from the De-Embedding
module; this is explained in detail in the points below.
Secondary or Backup (bk) input of the Internal De-Embedding module of the
Falcon Three TV SDI Audio Processor. This is the secondary input for the SDI
TV video signal. It is the video secondary input of the De-Embedding module
from the Falcon Three Audio signal. By default it is disconnected, but it is
available
Main or Primary (main) input of the Internal De-Embedding module of the Falcon
Three TV SDI Audio Processor. This is the main input for the video SDI TV
Video + Audio signal. It is the main input of the De-Embedding module to de-
embed the Video signal from the Audio signal which will then be processed by
Falcon Three TV SDI.
Digital Audio Input and AES/EBU Digital Audio Output based on XLR Male,
110 Ohm impedance
Digital Audio Input and AES/EBU Digital Audio Output based on XLR Female,
110 Ohm impedance
Audio analogic Output based on XLR Male.
Audio analogic Input based on XLR Female.
Falcon Three TV SDI is fitted with a Rj45 Ethernet port to monitor and control
the device. This port can also be used to control the Web Browser.
Serial Port 3 is used to control and manage the Falcon Three SDI TV. The
Baud Rate can be set at 2400, 4800, 9600, 19200, 38400 Baud from the menu
on the front panel.
Port available for future implementation; currently NOT CONNECTED.
FALCON THREE TV SDI
GENERAL DESCRIPTION
ENG
16
Advertisement
Table of Contents
