LG SA560 Owner's Manual page 5

CAUTION
y
When placing the projector on a table
or shelf, be careful not to put it near
the edge.
- The projector could fall due to bal- The projector could fall due to bal- The projector could fall due to bal-
ance problems, which may cause
personal injury or damage to the
product. Make sure to use the pro-
jector cabinet or stand that fits the
projector.
y
When moving the projector, make
sure to switch it off and remove the
power plug and cords.
- The power cord may be damaged,
resulting in fire or electric shock.
y
Do not place the projector on an
unstable or vibrating surface such as
a wobbly shelf or a slope.
- It may fall and cause injury.
y
Be careful not to tip the projector over
ZKHQ FRQQHFWLQJ H[WHUQDO GHYLFHV WR
the projector.
- This may cause personal injury or
damage to the projector.
Power
WARNING
y
The grounding wire should be con-
nected.
- Ensure that you connect the ground-
ing cable to avoid electric shock.
If it is not possible to ground the unit,
KDYH D TXDOL¿HG HOHFWULFLDQ LQVWDOO D
separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods or gas pipes.
y
The power plug should be inserted
fully into the power outlet.
- An unstable connection may cause
a fire.
Safety Precautions
y
Do not place heavy objects on the
power cord.
- This may result in fire or electric
shock.
y
Never touch the power plug with wet
hands.
- This may result in electric shock.
y
Do not plug too many devices into
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
y
Prevent dust from collecting on the
power plug pins or outlet.
- This may result in fire.
y
To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
5