Using The Input List; Using The Keystone Function - LG SA560 Owner's Manual

Using the Keystone Function

To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set up at a right
angle to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
‡.H\VWRQH 
CLOSE
1
Press the KEY.S
ton to adjust the picture.
y Keystone can be adjusted from -40
to 40.
2
Press the OK button when done.
or KEY.S but-
Watching with the Projector

Using the Input List

Using the Input List
1
Press the INPUT button to display the
input selection screen.
- The connected input mode appears
¿UVW
Component 5*%3&
AV
2
Select an input signal using the
remote control's INPUT button to
connect the projector to the desired
input. You can use the
to switch between all the input modes.
Adding Input Label
Displays which devices are connected to
which input ports.
AV Component 5*%3&
Select a device to change name.
Close
1
Press the INPUT button to display the
input selection screen.
2
Press the red button.
3
Press the or
desired input and press the OK button.
4
,
User the ,
select a device name.
27
RGB-PC2 +'0,
Change Device name
or button
RGB-PC2 +'0,
Change Device name
button to go to the
or button to