Specifications - Philips DVP721VR Service Manual

General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Timer
RF Modulator
System
Laser
Video Head system
Signal system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
INPUTS (VCR)
Audio
Video
OUTPUTS (DVD)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
RGB output
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
OUTPUTS (VCR)
Audio
Video
RGB output
*Design and specifications are subject to change without notice.

SPECIFICATIONS

AC 220-230V, 50Hz
19W
430 X 78.5 X 265 mm (w/h/d)
4.06 kg
5°C to 35°C (41°F to 95°F)
5 % to 90 %
24 hours display type
UHF 22-68 (Adjustable)
Semiconductor laser, wavelength 650 nm
Double azimuth 6 heads, helical scanning.
PAL
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
-6.0dBm, more than 10 kohms (SCART)
-6.0dBm, more than 47 kohms (RCA)
1.0 Vp-p, 75 ohms, unbalanced (SCART/RCA)
1 Vp-p 75 ohms, sync. negative
(Y) 1 Vp-p 75 ohms, negative sync., Mini Din 4-pin x 1
(C) 0.3 Vp-p 75 ohms
(Y) 1 Vp-p 75 ohms, negative sync., RCA jack x 1
(Progressive Scan) (Pb)/(Pr) 0.7 Vp-p 75 ohms, RCA jack x 2
0.7 Vp-p 75 ohms
0.5 V (p-p), 75 ohms, RCA jack x 1
3 V (p-p), 75 ohms, Optical connector x 1
2.0 Vrms (1 kHz, 0 dB), 600 ohms,
RCA jack (L, R) x 2/SCART (TO TV)
-6.0dBm, less than 1 kohms (SCART)
1.0Vp-p, 75 ohms, unbalanced (SCART)
0.7 Vp-p 75 ohms
1-5