Philips DVP721VR Service Manual page 82

DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Arm Assembly Tension
(Fig. A-4-2)
(H7)
Spring Tension
13. Brake Assembly T (Fig. A-4-1)
1) Release the spring tension from the lever spring hook
(H6).
2) Disassemble the brake assembly T while holding it
upward.
14. Arm Assembly Tension (Fig. A-4-2)
1) Release the spring tension the hook (H7) from the arm
assembly tension.
2) After releasing the hook (H8) of the base tension, sepa-
rate it while holding it up.
CAUTIONS
Spring used for both brake assembly T and arm assembly
tension is used (2EA used).
(Fig. A-4-3)
(H8)
Reel S
Spring Tension
Fig. A-4
15. Reel S/Reel T (Fig. A-4-3)
1) Disassemble the reel S/ reel T while holding it up (com-
parison between Reel S and Reel T)
Reel T
(Fig. A-4-3)
Brake Assembly T
(Fig. A-4-1)
(H6)
Reel S Reel T
4-6