ADT Ademco Vista 20P/PSIA Quick Manual

Table of Contents

Download this manual

Quick Guide:

For a detailed review of the entire system, please view the

Arm and Disarm

Arm:

To arm in STAY mode, when you are not leaving the premises, enter your [security code] + [3].



To arm in AWAY mode, when you are leaving the premises, enter your [security code] + [2].



To arm in MAXMIMUM mode, when no one will be in or around the premises for long periods of time,



enter your [security code] + [4].

Disarm:

To disarm, enter you're security code] + [1].



Ademco Vista – 20P/PSIA

Ademco Vista – 20P/PSIA system manual.

Table of Contents

Do you have a question about the Ademco Vista 20P/PSIA and is the answer not in the manual?

Page 1 Quick Guide: Ademco Vista – 20P/PSIA For a detailed review of the entire system, please view the Ademco Vista – 20P/PSIA system manual. Arm and Disarm Arm: To arm in STAY mode, when you are not leaving the premises, enter your [security code] + [3]. ...
Page 2: Change Time And Date
Battery The Ademco Vista 20P/PSIA operates on a UB 1270 battery.  Loss of AC power and use of backup battery power is indicated by NO AC.  A low battery condition is indicated by BAT or SYSTEM LO BAT ...
Page 3: Security Codes
Reset To silence an alarm and to clear memory of an alarm event, enter the [security code] + [1] sequence twice. Security Codes Your system will allow different security codes for use by other users, however only the Master user or Partition Programmer can assign user codes to users.
Page 4: Trouble Conditions
user codes to partitions. For a complete list of use authority levels and partitions, please see the Ademco Vista – 20P/PSIA system manual. Trouble Conditions Trouble conditions are issues that require your attention and are indicated on your panel’s display by the word CHECK + zone number and accompanied by beeping from the touchpad.